Legendary Wheel Co. GT9 Alloy Wheel 17"x8" Natural/Machined 1965-1973

CJ Pony Parts carries a variety of upgrades and restomod parts for your early model Mustang, including this Natural and Machined 17" x 8" GT9 Alloy Wheel from Legendary Wheel Co. Made to resemble iconic wheels from Ford's past, this wheel will enhance the look of your 1965-1973 Pony while complimenting its vintage body style. You can order this wheel individually or as a staggered set of four.

Wheel LW69-70854C Information:
Size: 17" x 8"
Lugs: 5 x 4.5"
Finish: Machined with Natural Finished Spokes
Backspacing: 4.75"
Weight: 18.5 lbs.
Center Cap: Included

This wheel's design was inspired by wheels from the 1969-1970 GT350 and GT500. It's a combination of the original Torque Thrust and iconic Magnum 500 wheels. It's made from cast aluminum and features a one-piece design, machined face and natural spokes. The unique spoke pattern will definitely set your car apart on the road and in the showroom. The wheel also features a clear gloss coat for added protection over time against the elements and debris you may encounter on the road.

The 17" x 8" wheel is made for rear fitment only in 1965-1968 Mustangs. It's available in a square set for 1969-1973 Mustangs and a staggered set for all 1965-1973 Mutangs. If you order a staggered set, you will receive two 17" x 7" wheels for the front and two 17" x 8" wheels for the back. A staggered set will provide your Mustang with a more aggressive stance while the square set will provide a classic, high-end look instead. This wheel is built to fit most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.75" of backspacing. It will clear most aftermarket brake kits.

*Lug nuts are sold separately.
*The square set of wheels comes with four (4) 17"x8" wheels. 
*The staggered set of wheels comes with 17”x7” front wheels and 17"x8" rear wheels.
*Legendary Wheel Co. “L” logo Center caps are included with the Legendary Wheel Co. wheels. Original style center caps with Ford licensed logos are sold separately and require P/N: CCWA1 for installation. Lug nuts are not included, CJ Pony Parts carries the correct lug nuts for installation of Legendary Wheel Co. wheels.

Additional Notes:
- This 17”x 8" wheel is intended for rear fitment only in 1965-1968 Mustangs, as wider wheels can rub on the front wheel opening when turning. The square set of 17"x8" wheels are recommended for 1969-1973 Mustangs only.
- These wheels require the use of extended thread lug nuts WHLLN118 or extended wheel studs.

Tech Tip: Even though these wheels are intended to fit the rear of most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.75" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.