License Plate Bracket STO N SHO Mustang Shelby GT350/ GT350R 2015-2019

CJ's Part Number:
97% of 100


  • 2-Piece Detachable System
  • 5052 And 6061 Aluminum
  • Easy Pop-Off Feature
  • Made In The USA
MSRP $97.99
You save 10%

STO N SHO License Plate Bracket for 2015, 2016, 2017, 2018 and 2019 Shelby GT350 and GT350R Mustangs.

Are you cringing at the thought of having to drill holes into your brand new 2015-2019 Shelby GT350 or GT350R Mustang? Tell your dealer to hold off on installing your new front-facing license plate until you order this STO N SHO License Plate Bracket from CJ Pony Parts!

This USA-constructed, premium-quality mounting system includes a front license plate holder and a base mounting plate. The easy-to-install base plate is completely undetectable and requires a single hole to be drilled into the underside of the vehicle. This hole is not visible and does not detract from the look of the vehicle. The license plate holder safely and securely holds standard front-facing plates when your pony is on the road, and easily detaches with the pull of a single pin when you want to show her off.

Features and Benefits:
- After-market bracket allows front-facing license plates to be safely displayed
- Two-piece, detachable mounting system for front facing plates
- Constructed of premium-quality 5052 and 6061 aluminum
- Coated in high-quality black automotive paint
- Product is tested and hand-cleaned to ensure optimum operation
- Does not require any permanent modifications

This STO N SHO two-piece mounting system is handcrafted in the USA of premium-quality 5052 and 6061 aluminum. Each piece of the system is cut from precision lasers and hand burnished and cleaned. After the pieces have been ground smooth, a high-quality black automotive paint is applied to protect your mounting system. These mounting systems are tested and cleaned to ensure optimum operation on your new Mustang.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

If you drive a new Shelby and live in a state that requires a front license plate, this stow and show bracket will allow you to install it without drilling holes in your brand new bumper. This stow and show bracket is made in the USA and is going to fit your 2015-2018 GT 350 and GT 350R. The stow and show's going to install easily on your Shelby without requiring any holes to be drilled. These four points here line up with four factory screws underneath your belly pan. You're going to remove all four screws, replace the front ones with these longer screws with these spacers. Install those first and then reinstall the rear factory screws and that will hold the plate in place.

Now this is going to mount to the car without drilling any additional holes by pulling this pin on the side here you can actually remove the plate and put it in the trunk for track events or car shows. Now when installing the stow and show will cause you just a little bit of ground clearance but it's actually designed to work as a skid plate so it won't damage anything and it's a much better way to mount the license plate on your new Shelby.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart