License Plate LED Light Kit 1994-2004

CJ's Part Number: LPLK4
MSRP: $41.95
CJ's Low Price:
1508284800 50099
Earn 34 RPM Points What's this?
License Plate LED Light Kit 1994-2004
License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004 License Plate LED Light Kit 1994-2004

Product Description

License Plate LED Light Kit for all 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.

License plates are an often overlooked area that can vastly improve the overall look of your 1994-2004 Mustang when upgraded properly. With age, license plate lenses may begin to yellow and crack; occasionally, license plate lenses may even fall off completely. Standard license plate light bulbs will eventually burn out and can lead to an increased chance of accidents, as well as unwanted attention from law enforcement. Prevent all of these unpleasant circumstances with this convenient license plate LED light kit assembled by CJ Pony Parts for your 1994-2004 Mustang, which features 3 LED bulbs to upgrade from the standard lights.

License Plate LED Light Kit Includes:
- License Plate Lamp Lenses (2)
- Ford License Plate Lamp Lens Screws (4)
- LED License Plate Light Bulbs (3)

The LED replacement bulbs for your original style light bulbs will shine much brighter and last much longer than traditional style bulbs. Each kit contains 3 LED bulbs, allowing users to save one as an extra part for later use and each LED bulb contains four micro light emitting diodes (LEDs). Additionally, the lights shine a sharp blue-white, offering a clean and highly noticable visual upgrade to your Mustang.

This kit has been assembled from high-quality products which will make your 1994-2004 Mustang look better than ever. All pieces are direct fit replacements, and the installation time is minimal. Even if your LED license plate lights are currently working properly, this is an excellent product to purchase in advance as a precautionary measure.

Take the time out of searching for each part on its own with this license plate LED light kit, which comes with everything you will need to replace your license plate lights, lenses and hardware. Buying these pieces in a kit also comes at a savings versus purchasing each part individually.

Purchase a License Plate LED Light Kit for your 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang today from CJ Pony Parts!

Similar Mustang Parts

similar Mustang parts More LED Bulbs  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
License Plate LED Light Kit 1994-2004 is rated 3.9 out of 5 by 8.
Rated 2 out of 5 by from Extremely unhappy with this kit. I've only had this kit for about 3 months on my 04, and the new lenses and bulbs look great but they fill up with water when it rains or when you wash the car, so they're not sealed well. The screws don't really grab that well and all three lights have gone out on me. Just replaced one bulb last week which had turned brown with the extra that was included and now both are dead. They look great for a little while, but it hasn't been a great quality kit for me. Pretty disappointed in this one, unless I just got a lemon which is possible
Date published: 2015-12-27
Rated 5 out of 5 by from Looks Great and Found Solution to Water Problem When I bought my 2004 Mustang, it had a water issue where car washing and bad weather would hinder and even shutdown performance of my OEM Ford License plate lights. The problems that I found were the sealing capabilities of the small weather stripping from the third break light where seeping water would find its way into the license plate lights and the fact that there was not a good sealing of OEM quality to the license plate. A simple solution was either add/replace weather stripping or find rubber seals as gaskets for the third break light module and license plate housings. Instead, along with other Mustang enthusiasts, I decided to upgrade my OEM parts to the Third Break light LED module and complete license plate LED kit (Sold on I found small rubber sealing and at an automotive store. The flat rubber weather-proof seals for universal applications that I used are very thin and can be used with universal sealing applications to fit various vehicles or utility work. Of course, an adjustment and cutting with a razor blade was performed to outline the license plate light casing for each bulb, but found out that the plastic screws did not hold well with the kit. I used relatively similar stainless steel screws and it worked well with the expanding plastic inserts and gave the license plate light casing the extra boost in its appearance. For the third break light, I took off the sealing gasket that was used and traced a pattern of the third break light onto the rest of the rubber sealing sheet. I cut it and sized it to the third break light. I used automotive grade superglue to attach the sealing and let it set for a few hours. I then reapplied the supplied foam gasket and mounted the third break light kit to the trunk and ensured a proper tight fit. Six inches of rain came down over a two day time and nothing has happened. I have waited to see if my applications have worked through enough rain storms before writing this post to ensure what I did was an added benefit for Mustang enthusiasts and to help others understand that some parts can be modified with proper attention to detail without hurting the integrity of the products that a company sells.
Date published: 2016-08-18
Rated 4 out of 5 by from Simple package, screws not sold together LEDs are ok, but not bright. Received lense first and screws a few weeks later as they were as a "package" and screws were on back order. Simple enough install. One of the screws was missing when I received them, but luckily I saved the original screws.
Date published: 2016-01-31
Rated 4 out of 5 by from Excellent, but... This is an excellent upgrade and looks amazing. Only problem is ordered the complete kit and the lenses were on back order, so i went ahead and put the bulbs in without them, and realize I didn't even need the lenses to make it look like i wanted.
Date published: 2016-06-16
Rated 2 out of 5 by from Don't plan on washing your car with these I've washed my car twice and both times I've had to stop and take the sockets out cause the plastic housings fill up with water...they look good but it's cheap quality needs better gaskets than the foam that's provided
Date published: 2016-11-11
Rated 5 out of 5 by from Awesome kit! I used my earned rpm points to purchase this kit and it was a lot of light for my buck. Easy to install and brought a newer look to my 96 mustang gt. Definitely recommend the the led upgrade.
Date published: 2016-12-15
Rated 4 out of 5 by from Perfect fit The only issue with these replacement lights are the cheap screws.. best bet is to push them in, don't waste your time screwing them in....other than that they look great
Date published: 2017-03-29
Rated 5 out of 5 by from awesome just added to my G T 2003 REALLY LIGHTS UP THE REAR
Date published: 2015-11-06
  • y_2017, m_10, d_16, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_LPLK4, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.38ms

Product Questions

Are the bulbs sold Separately? If so, what is the bulb number to order?

Asked by: Scoller
Look up BULB168. Note that these bulbs aren't LEDs. If you want LEDs, you have to get the kit.
Answered by: CJ Pony Parts
Date published: 2015-06-12

these LED bulbs will fit into the connector for the factory plug with no issues

Asked by: timstang15
Right, LEDs license plate bulbs are simply plug and play replacements.
Answered by: CJ Pony Parts
Date published: 2015-10-24
  • y_2017, m_10, d_16, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_LPLK4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.21ms

You Might Also Like