MagnaFlow Axle-Back Exhaust System MF Series Black With Dual 4" Tips Jeep Wrangler JK 2007-2018
- 2.5" Black Coated Axle Back
- Dual 4" Black Tips
- Easy Installation
- Made In The USA
MagnaFlow Black MF Series Axle-Back Exhaust System with Dual 4" Tips for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Increase your 2007-2018 Jeep JK Wrangler's performance with this Black MF Series Axle-Back Exhaust System with Dual 4" Tips from MagnaFlow. This performance exhaust kit will also give your JK the smooth, deep sound you desire!
Features and Benefits of the MagnaFlow Black MF Series Axle-Back Exhaust System with Dual 4" Tips (15160):
- Crafted from 409 stainless steel
- High-temperature satin black coating
- Increases horsepower and torque
- Mandrel-bent tubing
- 2-1/2" diameter pipe
- Dual split rear exit
- Comes with stainless steel band clamp
- Made in the USA
- Fits ALL 2007-2018 2-Door and 4-Door JK Wranglers
This split exit performance exhaust system features a straight-through flow design for added horsepower and torque gains. It has an engineered balance of interior and exterior noise levels. MagnaFlow manufactures this premium exhaust kit in the USA from high-grade stainless steel and gives it a durable high-temperature satin black coating for an aggressive, unique style upgrade to your Jeep!
CJ Pony Parts offers a wide variety of MagnaFlow products for our customers. If you're looking for one of the top performing and best sounding exhausts on the market, you'll want to check out our selection of MagnaFlow parts.
Order MagnaFlow's 15160 Black MF Series Axle-Back Exhaust System with Dual 4" Tips for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.
Novice skill is required for this installation.
This axle-back exhaust is going to be a direct fit replacement for the factory muffler, and it's made of black powder coated stainless steel with a straight-through muffler design and 4" tips. It's going to help our Jeep look, sound, and breathe better, so today we're going to install it using our 2016 Jeep Wrangler.
This axle-back exhaust is going to be super easy to install. There's only one 15mm nut holding it on. Then, you just have to remove the muffler from the two rubber hangers. Remove the 15mm nut on the exhaust clamp. Now, we're going to remove this bracket from the rubber hanger on the Jeep. All right. Now, we can move to the other hanger. Once both hangers are disconnected, grab onto the muffler and twist it to break it loose from the pipe. Then, you can pull it off.
The whole axle-back is completely assembled, so all I have to do is slide the provided clamp over the over-axle pipe. Then, install the hanger that we took off onto the axle-back. We're going to install this into the driver-side hanger, then the over-axle pipe, and then into the passenger-side hanger. Spraying the hangers with WD-40 will probably help you installing them.
Now, we'll get it in the over-axle pipe. Then, install the passenger- side hanger. Push the axle-back and the over-axle pipe together to fully seat them. Then, install the clamp and tighten it with a 15mm socket, and your installation's finished. Now, we can see how it sounds.
Our MagnaFlow Axle-Back Exhaust is installed. It looks really good and it sounds great too. It's not too loud. Installation will only take you about 30 to 45 minutes, and before you know it you'll be heading off-road.