MagnaFlow Headpipe 2-1/2" Pair 351W 1967-1970

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 122.76ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Fits 1967-1970 351W Mustangs
  • 2.5" Dual Exhaust Headpipes
  • Includes 3" Adaptor Pipe
  • For OE Style Exhaust Manifolds
MSRP $347.58
You save 32%

Pair of MagnaFlow 2-1/2" Headpipes for 1967, 1968, 1969 and 1970 Mustangs with a 351W Engine.

If you’re installing a new exhaust system on your 1967-1970 Mustang but you’re using the factory exhaust manifold, install a pair of MagnaFlow headpipes today. This pair of headpipes will work on all 1967-1970 Mustangs with a 351W Engine. The pair of headpipes from MagnaFlow will allow you to install any exhaust system on your Mustang.

- Fits 1967-1970 Mustangs
- Works with 351W Engines
- Mandrel Bent Piping
- 2-1/2" Diameter Pipe
- 3" Adapter Pipe

Please Note: This MagnaFlow Headpipes will Not work on Hi-Po Exhaust Manifolds.

The mandrel bent piping will provide the best exhaust flow, better than the stock restrictive piping. The 2-1/2" Headpipes mount to the original style exhaust manifold on your 351W Engine. The headpipes include 3" adapter pipes, used to connect to a 3" exhaust system. When installing this pair of headpipes you will have the ability to pretty much run any exhaust in the market. Welding is required when installing this pair of headpipes to your 1967-1970 Mustang.

Researching aftermarket exhausts for Mustangs always seems to lead to a few common brands that have quality products and the most recognizable rumbles. Of these, MagnaFlow clearly leads the pack, with over 30 years of experience and some of the highest quality products on the market. CJ Pony Parts offers dozens of MagnaFlow products for any Mustang on the road.

Purchase a new Pair of MagnaFlow 2-1/2" Headpipes for 1967, 1968, 1969 and 1970 Mustangs with a 351W Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.58ms
  • bvseo-msg: HTTP status code of 404 was returned;

Hi, does this parts fit a 351 cleveland engine?

Asked by: DFDF
Yes it should fit, We tested these on a 1969 Windsor 351 and 1970 Cleveland 351
Answered by: Magnaflow
Date published: 2018-05-14

Are these constructed out of Stainless Steel?

Asked by: overtonefour
No they are not.
Answered by: rk cjpp
Date published: 2017-02-10

Hello - I'm interested in the magnaflow kit for my 302 - do you stock head pipes for that motor for the magnaflow kit?

Asked by: z69grande
No, we don't. Just for 289s and 351s.
Answered by: CJ Pony Parts
Date published: 2015-01-20
  • y_2020, m_6, d_5, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_EX16446, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 136.87ms