MagnaFlow Muffler XL 3-Chamber Center/Offset 2-1/2"

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 167.54ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • 16-Gauge Stainless Steel
  • 20" Overall Length
  • 2-1/2" Inlet/Outlet Size
  • Center/Offset Xl 3-Chamber
MSRP $106.41
You save 32%

MagnaFlow 2-1/2" Center/Offset XL 3-Chamber Muffler.

Enhance the look and strength of the performance and sound of the exhaust on your vintage vehicle's exhaust with this new MagnaFlow 2-1/2" Center/Offset XL 3-Chamber Muffler courtesy of MagnaFlow. The muffler body has been produced using premium-quality stainless steel for a strong, durable piece of equipment that appears as impressive as it performs, giving your car or truck an increase in overall horsepower.

This new MagnaFlow XL 3-Chamber Muffler has been put together with a uniquely designed large diameter, perforated tubing, as well as strategically placed sound baffles that are utilized in order to reduce any unwanted resonating sounds and help your engine gain additions in horsepower. The sound baffles limit the sound waves to a tolerable level using a newly designed set of calibrated tuning gate openings, these openings allow small amounts of the sound waves to pass through the sound baffles. These tuned sound waves are then able to reflect off the back wall of the muffler and eliminate a greater portion of the harsher exhaust noises.

MagnaFlow 2-1/2" Muffler Features and Benefits:
- 2-1/2-Inch Inlet/Outlet Openings
- Three (3) Separate Chambers for Reduced Noise
- Sound Baffles to Remove Unwanted Resonance
- Center Mounted and Offset Mounted Inlet/Outlet
- Reversible Positioning for Custom Installations  

The large diameter perforated core frees the flow of air by getting rid of the restrictions that are present in louvered style cores. Increasing the airflow of the muffler allows for a better flow of air from the engine out of your exhaust, this makes increases in horsepower easier to achieve. Using this careful balance between perforation size and spacing, as well as the baffle tuning gate makes for a high quality, 3-chamber performance muffler that will increase the horsepower of your 1965-1973 Mustang.

Please Note: This MagnaFlow muffler is completely reversible for the ability to fit custom installation needs.

Researching aftermarket exhausts for vintage cars and trucks always seems to lead to a few common brands that have quality products and the most recognizable rumbles. Of these, MagnaFlow clearly leads the pack, with over 30 years of experience and some of the highest quality products on the market. CJ Pony Parts offers dozens of MagnaFlow products for any classic vehicle on the road, so check out their products and upgrade your exhaust today!

Order yourself a new MagnaFlow 13216 2-1/2" Center/Offset XL 3-Chamber Muffler from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following C10 years:

  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,
  • 1980,
  • 1981,
  • 1982,
  • 1983,
  • 1984,
  • 1985,
  • 1986,
  • 1987,

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.77ms
  • bvseo-msg: HTTP status code of 404 was returned;

What Magnaflow muffler do you recommend for a 2013 Mustang V6?

Asked by: Prince21
See P/N: CBG64 and CBG65
Answered by: CJPP Dave
Date published: 2017-08-31

I have a 2005 mustang 4.0L v6 will it work

Asked by: jason 7888
No it will not.
Answered by: rk cjpp
Date published: 2016-12-13

The description on this is the opposite of what it reads at the top??  Can you verify that it is  3" inlet 2-1/2" outlet?

Asked by: Crystal4118
This is a 3 chamber muffler with a 2 1/2 inlet and outlet.
Answered by: rk cjpp
Date published: 2016-09-12

Is this the same xl muffler used in the YouTube vid on the 2011-2014 v6?

Asked by: Jkrj2016
No it is not.
Answered by: rk cjpp
Date published: 2016-07-13

i have a 2012 mustang do you thing works

Asked by: angelnc
This will not work with a 2012 Mustang.
Answered by: CJ Pony Parts
Date published: 2015-04-15

Hey, I just wanted to know if this one will fit on a 2014 V6 mustang? Thanks

Asked by: MathieuCpn
No, it's for classic 1965-1973 Mustangs only.
Answered by: CJ Pony Parts
Date published: 2015-03-31
  • y_2020, m_1, d_23, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_EXM13216, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 191.32ms