Manual Shifter Bezel With Lighter And Traction Control Switch Holes Dark Charcoal 1999-2004

CJ's Part Number:
100% of 100


  • Made In The USA
  • Original Ford Tooling
  • Molded Black Plastic
  • Direct-Fit Replacement
MSRP $49.95
You save 9%

Dark Charcoal Manual Shifter Bezel with Lighter and Traction Control Switch Holes for 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a Manual Transmission.

When removing the shifter bezel on your 1994-2004 Mustang do you notice that the plastic tabs are broken that hold the bezel to the center console? If so it’s time to replace the worn out damaged bezel with this reproduction shifter bezel. This shifter bezel is manufactured out of a durable plastic that mimics the original shifter bezel on the 1999-2004 Mustang.

The reproduction shifter bezel will work on 1999-2004 Mustangs with a cigarette lighter and a traction control switch. The cigarette lighter is on the passenger side and the traction control switch cut out is on the driver side of the shifter bezel. The outer perimeter of the bezel features the correct textured finish that is carried to the center console. With this being a Ford Tooling part you know that the fit and finish is correct for your 1999-2004 Mustang.

- Fits 1999-2004 Mustangs
- Correct Textured Finish
- Made using Ford Tooling
- Easy Installation
- Made in the USA!

Shifter Boot Push Nuts (8)
- Mounting Clips (4)

*In 1999 to 2000 Mid-September Mustangs with the traction control switch mounted in the shifter bezel should use P/N MSBR19.
*1994-1998 Mustangs use a smaller diameter cigarette lighter and must use P/N HW3449 to install the factory cigarette lighter into the new shifter bezel.

The console in many late model Mustangs is a convenient place to store change and papers, and throw your drink while you're on the road. Since center console are typically heavily used part in your Mustang, those parts will occasionally break. CJ Pony Parts offers many 1999-2004 console replacement parts, so you can quickly fix your console.

Purchase a new Dark Charcoal Manual Shifter Bezel with Lighter and Traction Control Switch Holes for your 1999, 2000, 2001, 2002, 2003 or 2004 Mustang with a Manual Transmission from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here with a manual transmission shifter bezel fitting your 1994 through 2004 Mustang. This is a reproduction of the original shifter bezel found in the 1999 through 2004 Mustang with a manual transmission but it will physically fit your 94 through 98 as well. It is charcoal in color and has the correct cutouts for both your traction control button and your cigarette lighter. The other side of the bezel's also correct. It has the seven tabs for mounting your shifter boot and then the four tabs on the sides here for mounting to the actual console. All the hardware for mounting is included. This Ford licensed manual transmission shifter bezel's the perfect choice for replacing your lost or damaged original bezel on your 99 through 2004 Mustang.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.