MGP Brake Caliper Cover Set Black With Silver Jeep Logo Jeep Wrangler JK 2007-2018
- Enhances Wheel Appearance
- Reduces Brake Dust
- Reduces Caliper Heat
- Mopar Licensed
Set of MGP Black Brake Caliper Covers with Silver Jeep Logos for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
If you're looking to customize the look of your 2007-2018 Jeep Wrangler JK's factory brake calipers, MGP's 42007SJEPBK Black Brake Caliper Cover Set will add to the off road style you're going for. Displaying a silver Jeep logo and simulated bolts over a black powder coat, this four piece set will properly accent your wheels. Manufactured from 6061-T6 aerospace aluminum, this set of four MGP Brake Caliper Covers will hold up in any on or off road conditions.
Features and Benefits:
- Black powder coated finish with silver Jeep logo and simulated bolts
- Manufactured from 6061-T6 aerospace aluminum
- Easy and simple installation
- Big brake look without big brake cost
- Brake dust reduction on wheels
- Caliper heat and brake fade reduction
- Two front caliper covers with Jeep logo
- Two rear caliper covers with Jeep logo
- All necessary mounting hardware
- Detailed instructions
Fabricated using precision CNC machining, hydraulic forming and TIG welding this Black Brake Caliper Cover Set exceeds the production standards you'd expect from MGP. MGP extensively tests their caliper covers for stress, heat, corrosion, long term driving as well as on and off road track testing to ensure you are getting the best caliper covers available. The easy, DIY installation process is extensively detailed in the included instructions.
*For use with 17" wheels and up.
*Requires 1/8" caliper face to spoke clearance.
Order this Set of MGP 42007SJEPBK Black Brake Caliper Covers with Silver Jeep Logos for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler today from CJ Pony Parts.
California Residents: Proposition 65 Warning
The first thing that we're going to do is get the Jeep off the ground and take the wheels off. Then we're going to start with the front. Grab your front caliper cover. It's the one with the studs on the cover with the nuts. Loosen the nuts a little bit so there's a little bit of gap, then place it on the caliper. Then grab the clips for the front covers. Make sure the slot is on the top, then install it over the bracket and do the same thing to the bottom. Tighten the nuts with a 10 millimeter socket. Check and make sure that the rotor's clear of the clips and make sure they don't rub. If they do rub, just bend them a little bit and you should be good to go.
Grab the clips for the rear. They have the stud on them with the nut. Remove the nut and install it onto the caliper bracket. Place the cover over the studs. Make sure it sits flush on the caliper and install the nuts, then tighten the nuts with a 10 millimeter socket. Repeat the process for the other calipers, then your installation's finished. Our MGP brake caliper covers are installed. They give our Jeep a nice custom look and they go really well with our wheels. Installation's super easy. It's only going to take about 30 to 45 minutes and before you know it you'll be heading off-road.