MGP Brake Caliper Cover Set With Silver Ford Oval Logo For Mechanical Parking Brake F-150 2012-2019 / F-150 Raptor 2012-2014/2017-2019
Set of MGP Brake Caliper Covers with Silver Ford Oval Logo for 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019 F-150s and 2012, 2013, 2014, 2017, 2018 and 2019 F-150 Raptors with a Mechanical Parking Brake.
If you are looking to give your 2012-2019 F-150 or Raptor a new look, then you should check out this Set of Brake Caliper Covers with Silver Ford Oval Logo from MGP! Available at CJ Pony Parts, these caliper covers add a great new look to your F-150 while giving your calipers some added protection.
MGP Brake Caliper Cover Features and Benefits:
- Direct-Fit Upgrade for 2012-2019 F-150s and 2012-2014/2017-2019 Raptors with a Mechanical Parking Brake
- Available in Black or Red
- Features Silver Ford Oval Logo
- 6061-T6 Aerospace Aluminum Construction
- Enhances Wheel Appearance
- Reduces Brake Dust Build-Up on Wheels
- Reduces Caliper Heat and Brake Fade
- Easy Installation
Coming as a set of four, these Brake Caliper Covers from MGP will cover the front and rear calipers of your late-model F-150. They come in your choice of black or red and feature the Ford oval logo in silver. The caliper covers are constructed from 6061-T6 aerospace aluminum which provides the covers with a durable and long lasting construction. This set of covers will enhance the wheel appearance of your F-150 while reducing caliper heat, brake fade, and the build-up of brake dust on your wheels. Installation is simple and quicker than painting the calipers yourself.
- (2) Front Caliper Covers with Logo
- (2) Rear Caliper Covers with Logo
- All necessary Mounting Hardware
- Detailed Instructions
Sub Model Fitment - FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, XL, XLT, Limited and 2012-2014 and 2017-2018 SVT Raptors
*For 2015-2019 F-150s and Raptors equipped with a Mechanical Parking brake ONLY.
*For use with 18” wheels and up.
*Requires 1/8” caliper face to spoke clearance.
Do you love the look of your F-150's wheels, but hate the look of the ugly factory issued front and rear brake calipers? If so, then CJ Pony Parts has just the solution for you: MGP caliper covers. These attractive caliper covers serve the purpose of protecting your stock front and rear brake calipers as well as adding a great aesthetic boost to the inside of your F-150's wheels without using caliper paint.
Order this Set of MGP Brake Caliper Covers with Silver Ford Oval Logo for your 2012, 2013, 2014, 2015, 2016, 2017, 2018 or 2019 F-150 or your 2012, 2013, 2014, 2017, 2018 or 2019 F-150 Raptor with a Mechanical Parking Brake from CJ Pony Parts today!
These break caliper covers are made of high quality T6 6061 aluminum in your choice of red or black with a nice Ford logo that will give your truck a nice custom look and reduce the amount of break dust that gets on your wheels.
They come with everything you need for an easy installation so today we're gonna install them on our 2016 F-150.
Installing these caliber covers is pretty easy. The first thing you have to do is get the truck up in the air and take the wheel off then grab your cover and loosen the nuts on the back of the cover.
You don't have to completely remove them. Just give them enough room for the brackets to get into. Place the cover over the caliber and make sure it sits flush against the caliber. Then slide the clips onto the bracket and underneath the nut. Do the same thing on the bottom of the caliber.
Once you get both clips on, tighten up both nuts with a 10 millimeter socket.
Once you have everything tightened down, check and make sure you have clearance on the clips. If the rotor is touching it, just bend the clips a little bit and you should be good. Then once you're finished you can move onto the rear.
Okay. We're at the rear of the truck now, same process as the front. Take the wheel off, place the cover on the caliber nice and flush then install the clips. Place the cover on the caliber. Then install your clip. If you think the clip is too small, remove the clip, spread it with your fingers to open it a little wider, then it should fit perfectly. Same thing on the bottom.
Then tighten down both nuts.
All right. Then repeat the process on the other side and your installation's finished.
Our MGP break caliber covers are installed. They pop really well behind these black wheels and they give our F-150 a nice custom touch. Installation's super easy. It should only take about an hour and before you know it, you'll be heading off-road.