MGP Brake Caliper Cover Set With Silver Raptor Logo F-150 Raptor 2012-2014/2017-2019
Set of MGP Brake Caliper Covers with Silver Raptor Logo for 2012, 2013, 2014, 2017, 2018 and 2019 F-150 Raptors.
Add more style to your 2012-2019 F-150 Raptor when you install this Set of MGP Brake Caliper Covers with Silver Raptor Logo from CJ Pony Parts! The Raptor already has an aggressive appearance, and these caliper covers add to that style with a black or red finish and silver Raptor logo.
MGP Brake Caliper Cover Features and Benefits:
- Direct-Fit Upgrade for 2012-2014/2017-2019 F150 Raptors
- Available in Black or Red
- Features Silver Raptor Logo
- 6061-T6 Aerospace Aluminum Construction
- Enhances Wheel Appearance
- Reduces Brake Dust Build-Up on Wheels
- Reduces Caliper Heat and Brake Fade
- Easy Installation
MGP constructs these caliper covers from 6061-T6 aerospace aluminum for a durable construction that will last for many miles on your Raptor. They come as a set of four to complete the front and rear brake calipers of your F-150 Raptor. You have your choice between black and red covers with a contrasting silver Raptor logo for added style. These covers will look great on your truck but they will also help to reduce caliper heat, brake fade and brake dust build-up on your wheels. Installation is simple and quicker than painting the calipers yourself.
- (2) Front Caliper Covers with Logo
- (2) Rear Caliper Covers with Logo
- All necessary Mounting Hardware
- Detailed Instructions
*For use with 18” wheels and up.
*Requires 1/8” caliper face to spoke clearance.
Do you love the look of your F-150 Raptor's wheels, but hate the look of the ugly factory issued front and rear brake calipers? If so, then CJ Pony Parts has just the solution for you: MGP caliper covers. These attractive caliper covers serve the purpose of protecting your stock front and rear brake calipers as well as adding a great aesthetic boost to the inside of your Raptor’s wheels without using caliper paint.
Order this Set of MGP Brake Caliper Covers with Silver Raptor Logo for your 2012, 2013, 2014, 2017, 2018 or 2019 F-150 Raptor from CJ Pony Parts today!
These caliper covers easily install over the factor brakes and they're made of T661 aluminum and they come in your choice of red or black to give your truck a nice custom look. They're super easy to install and will help reduce the amount of brake dust on your wheels, so today we're going to install them on our 2012 F-150 Raptor.
These caliper covers are pretty easy to install. The first thing you have to do, get the truck up in the air and then take the wheel off. Then, grab your front cover and line it up with the caliper. Get it on nice and flush. Then loosen the nuts on the cover but don't remove them. With the nut loosened, you can install the clip. Slide the clip underneath the caliper bracket and under the nut, and then tighten the nut with your hand. Tighten the nut on the bottom. Make sure the cover is aligned nice and where you want it. Then tighten down both nuts. Once you get both nuts tightened, check for clearance and make sure the rotor clears. Then you can move on to the rear.
All right. We're at the back of the truck now. The process for the rear is pretty much the same as the front. Loosen up the nuts. Then place the cover on the caliper. Once you have the cover on the caliper, install the clips. Then tighten the nuts. Then tighten the nuts. Check and make sure you have clearance on all the clips. Then you can repeat the process on the other side, and your installation is finished.
Our MGP brake caliper covers are installed. They look really good on this black truck and pop really well behind the black wheels. Installation is not too bad. It should only take about an hour and before you know it, you'll be heading off road.