Mishimoto Cold Air Intake Kit Polished Mustang EcoBoost 2015-2017

98% of 100


  • Direct Fit Replacement
  • Silicone Turbo Inlet Hose
  • High-Flow Oiled Filter
  • Airbox With Protective Edging
MSRP $393.34
You save 9%

Mishimoto Polished Cold Air Intake Kit for all 2015, 2016 and 2017 EcoBoost Mustangs.

Take your 2015-2017 EcoBoost Mustang to a whole new performance level by purchasing this Polished Cold Air Intake Kit from Mishimoto. This kit comes complete with high-grade materials that will keep your engine bay protected while pushing the boundaries of your performance levels.

Features and Benefits:
- Direct Fit
- Dyno-Proven to Receive Gains Up to 8 whp & 9 wtq on Stock Tune
- Designed to Work with Stock Tune
- Receives Maximum Airflow from Front
- Operates Up to 2,000 CFM
- 155% Larger Filter Surface Area
- Black Powder-Coated Finish on Airbox
- Prevents Hot Air from Entering Air Filter
- Hose Includes CNC-Machined Ports & Added Reinforcement Rings
- Increased Durability
- Strongly Aggressive Intake Tone Under Acceleration
- Accommodates Stock Inlet Duct
- Simple, Quick Install
- Made in the USA

Mishimoto's cold air intake kit is designed to be a direct fit on your 2015-2017 EcoBoost Mustang featuring a variety of high-performance components. You'll receive an intake pipe that is made from mandrel-bent aluminum and is 3.5" in diameter. This pipe will work with the turbo inlet hose that is wire-reinforced and made from silicone. This hose will not collapse under suction & boost so it will prevent your intake pipe from any undesired heat-soak. The hose also has ports that are CNC-machined as well as added reinforcement rings so you'll get a more durable upgrade.

Mishimoto's kit also includes a high-flow, oiled filter that has an increased filtration surface area. This filter can conveniently be cleaned & reused so you'll get production for life. It will make sure your S550 will receive the maximum amount of airflow from the front of the vehicle, operating up to 2,000 CFM. This kit also utilizes an airbox that has a protective edging and is enclosed within your assembly. The black powder-coated airbox will gather all of the cold outside air from the front over your engine while protecting against any engine bay heat-soak.

Installing this kit to your 2015-2017 EcoBoost is safe to use with your stock tune and will fit easily with your factory inlet duct in the front of the bumper. Generating a more aggressive intake tone under acceleration, this cold air intake kit has been dyno-proven to see maximum gains up to 8 whp & 9 wtq. American made, this kit will provide you with the proper hardware, allowing you to easily install everything in less than an hour.

Kit Includes:
- Aluminum Intake Pipe
- Silicone Turbo Inlet Hose
- High-Flow, Oiled Filter
- Airbox with Protective Edging
- Hardware

Please Note:
- Power gains may vary depending on any other engine modifications that are done to your Mustang, atmospheric conditions, ambient temperature and the mileage of your Pony. You may or may not witness the maximum published gains from this cold air intake kit.
- It is not recommended to use this kit with an aftermarket downpipe or cat-back exhaust, when used on your stock engine tune. It is recommended you get aftermarket engine tuning provisions if you decided to use this with an aftermarket downpipe.

Vehicle Fitment:
- 2015-2017 EcoBoost Mustang

*NOT designed for use with 2018+ models.

California Residents: Proposition 65 Warning

This item is 50-state legal (CARB E.O. Number D-759-1)

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with Mishimoto's cold air intake kit fitting all 2015 EcoBoost Mustangs.

The Mishimoto cold air intake is a great way to add horsepower and torque to your EcoBoost Mustang with no tune required. It features a silicone coupler hose here leading to this polished aluminum cold air inlet tube. At the end of the air intake tube is this lifetime reusable air filter that has a 155 percent larger surface capacity than your stock air filter does. It also has this aluminum air box, comes in a nice powder coated finish, and the cold air kit actually bolts to it to keep everything nice and tight when installed.

The Mishimoto cold air kit includes all necessary hardware for installation. It is a great way to turn up the power on your EcoBoost Mustang

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.