Mishimoto Front Mount Intercooler Black EcoBoost 2015-2020
Mishimoto Front Mount Intercooler Black EcoBoost 2015-2019 is rated out of 5 by 1.
- Direct Fit
- Increased Fin Surface Area
- 25% Increased Core Volume
- Tig-Welded Construction
You save 20%
Rated 5 out of 5 by EcoMonster from Best Intercooler Upgrade for the Ecoboost Mustang Hi Guys - first off I held the IC for three weeks, before performing the install, not because I wanted to, but because of time and lots of rain here in GA. I finally got around to installing it about three-four weeks ago and It was absolutely worth the upgrade. It’s also worth noting, this should be considered the first upgrade to do on the Eco boost, given the significant reduction in heat soak and cooling it adds to your system. Before doing any tune upgrades, you need to get the cooling under control and the factor IC is small, lightweight and a piece of garbage. This aftermarket unit is larger, heavier and we way more cooling capacity. I used my sister’s garage to do the install with jacks and jack stands. The install time took about 6 hours to complete, because I took my time. The single screw that holds the front bumper to the frame on both sides, just an FYI is absolute pain to get out. The area its located in is cramped and you don't get much turn radius, when using socket wrench in the tiny space. PERFORMANCE GAINS: The temps here in GA the past few weeks have been ranging from 86-90 with humidity levels between 75%-85%. Prior to installing the upgraded IC, my factory IC would have inlet temps of around 20-25 degrees higher than the ambient temp and this was while driving around town and being on the move. Sitting in traffic, those temps could get as high as 35-40 degrees higher than ambient temp. After the IC upgrade and driving on the highway and around town, my temps are sitting around ambient to +5-+7 degrees difference. Sitting in traffic with no wind, high humidity and hot exhaust fumes from cars in front of you. Expect those temps will go up and in my case, typically +20 to ambient, until I get moving and the temp’s start coming down significantly. Tale gating will add to the increased temps FYI. As far as me being able to do multiple pulls with this IC, I have seen no drops in performance and can do pulls consistently, unlike the factory IC, which couldn't cool properly and I would be lucky to get two consistent pulls without losing HP. Overall I'm very happy with this upgrade and would recommend it as the best first upgrade for any Ecoboost Mustang.
Date published: 2017-07-13
I bought one of your inter-coolers but need the printed installation instructions to down load, Are they available?
Try this link. https://cdn.mishimoto.com/media/productpdf/MMINT-MUS4-15_INSTALLATIONGUIDE.pdf
Date published: 2019-07-28
Will this work with factory connections or do you have to order new hoses?
You can use the stock hoses.
Date published: 2018-12-24
Will this void the factory warranty on the drivetrain?
Unless the product in question is directly responsible for an issue, your warranty should remain intact. Read up on the Magnuson-Moss Warranty Act for more details.
Date published: 2016-03-30
IF I DO NOT TUNE WITH U/G MISHIMOTO INTERCOOLER WHAT BINIFIT THE ENGINE WILL RECIVE ?
Even if you do not install a tune, you will still see major benefits in increased inlet air temps. You car will be better prepared to resist heat soak conditions.
Date published: 2019-02-04
DO YOU SHIP TO GUAM ?
Yes we do. To get a shipping quote, add it to your shopping cart and proceed to checkout. In checkout, fill out your address info and scroll down to see shipping options and costs to your area.
Date published: 2015-11-09
Complete Your Package