Mishimoto Intercooler Performance Kit With Pipes Mustang EcoBoost 2015-2022

Set your 2015-2022 EcoBoost Mustang up for success with the benefits of increased airflow and improved cooling! The Mishimoto Performance Intercooler Kit is designed with a 58% increase in core size, 25% increase in internal core volume and 165% increase in external fin surface area for maximum cooling! Best of all, you can select from a stealth black or sleek silver cooler and your choice of pipes with a polished silver or wrinkle black finish. 

Features and Benefits:
- Direct-Fit for the 2015+ EcoBoost
- 35°F (19.45°C) Reduction in AIT
- 25% Increase in Internal Core Volume 
- 165% Increase in External Fin Surface Area
- Cast End Tanks and in-Tank Diverter 
- Does Not Require Removal of Front Bumper Cover
- Retains Stock Active Grille Shutters
- Bar-and-Plate Construction with All-Aluminum TIG-Welded End Tanks
- Your Choice of Stealth Black or Sleek Silver Intercooler
- Pipes with a Polished Silver or Wrinkle Black Finish
- CARB EO #: D-759

The Mishimoto Intercooler is a direct-fit unit that fits with the stock active grille shutters, maintaining ideal aerodynamics when cooling demands are lower. It also mounts in the stock location, thus preventing airflow blockage to the radiator and AC condenser. The cooler features CFD-tested, cast end tanks, along with an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. With the ability to reduce intake temperatures by 35°F (19.45°C) with minimal pressure loss, the Intercooler further promotes maximum cooling results. This EcoBoost intercooler features precision TIG-welding and requires no modifications to your Mustang. 

Kit Includes: 
- (1) Mishimoto Intercooler
- (1) Aluminum Pipe w/ CNC-Machined NPT Bung
- (1) Aluminum Pipe w/ CNC-Machined BPV Flange
- (4) Silicone Couplers
- (1) 2.0" T-Bolt Clamp
- (4) 2.75" T-Bolt Clamps
- (3) 3.0" T-Bolt Clamps
- (1) M6 x 1.0 x 20mm Flange Bolt
- (1) M4 x 0.7 x 12mm Button Head Bolt
- (1) M4 Lock Washer
- (1) MAP Sensor O-Ring

The kit is designed with 2.5-inch hot-side and 2.75-inch cold-side mandrel-bent aluminum piping to eliminate restrictive bends and achieve smooth airflow. Four-layer silicone couplers come with heat-resistant embedded fibers for improved tolerance against heat and pressure. You'll also receive premium-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange on the hot-side pipe allows you to retain the stock BPV or install a stock-style BPV.

Tech Tip: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).