Mishimoto Oil Separator Kit Black EcoBoost 2015-2020

Mishimoto:
MMBCC-MUS4-15PBK
Rating:
94% of 100

Highlights

  • 6061 Aluminum Construction
  • Direct Fit
  • Protects From Carbon Buildup
  • Ensures Engine Longevity
MSRP $245.71
$180.95
You save 26%

Mishimoto Black Oil Separator Kit for 2015, 2016, 2017, 2018, 2019 and 2020 EcoBoost Mustangs.

Any Mustang owner should be concerned about the longevity of their engine. And this Mishimoto Black Oil Separator Kit will help ensure a long and happy life for your 2015-2020 EcoBoost Mustang’s engine. Oil Separators are used to reduce carbon buildup in the intake manifold and throttle body area, which is a common problem with direct fuel injection engines.

Features and Benefits:
- Protects Engine Against Unnecessary Carbon Buildup
- Carbon Buildup is a Common Issue on Direct Fuel Injected Engines
- Preassembled Quick-Disconnect Fittings Allow for Easy Installation and Removal
- Includes All Necessary Mounting Hardware
- Ensures Longevity of Your Engine

The best way to make sure the motor in your 2015-2020 EcoBoost is safe is to pick up one of these Black Oil Separator Kits from Mishimoto. One of the downsides of having a turbocharged engine is the amount of carbon buildup that could occur in your throttle body and intake manifold. In an effort to minimize that degrading effect, Mishimoto developed a catch can to perfectly fit your EcoBoost with ease.

Kit Includes:
- (1) Mounting Bracket
- (1) Black, Anodized 6061 Aluminum Catch Can
- (2) Direct-Fit Silicone Hoses with Quick-Disconnect Fittings
- (2) Plastic Barbed Fittings
- (2) Worm-Gear Clamps
- (1) Air Diverter
- (1) Internal Baffle & Rod
- (1) 3/8” NPT Plug
- (1) Large O-Ring
- Mounting Hardware

Coming with everything you need for a simple and straightforward installation, this Black Oil Separator Kit is placed in the vacuum assisted PCV system of your Mustang will yield the most oil accumulation during normal and aggressive driving. The Boss 302S Mustang uses the same type of oil separator to prevent buildup as well.

Mishimoto logged thousands of test miles with this kit ensuring that it’s built to last against the elements and heat cycles of your engine. Coming with a bronze filter, this catch can is internally baffled to better separate the oil from the PCV vapors which your engine needs to operate properly. Also included is a direct fit mounting bracket that proves for an easy installation, and is made to be mounted in an easily serviceable location. Installation and servicing of this oil separator couldn’t be any easier on your 2015-2020 EcoBoost Mustang!

Tech Tip: Once installed, CJ Pony Parts recommends to check the contents of your new oil separator every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Please Note: This oil separator kit is also available with red hoses (OILSEP30R) for your 2015-2020 EcoBoost Mustang.

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with Mishimoto's oil separator kit fitting your 2015 EcoBoost Mustang.

An oil separator like this direct fit kit from Mishimoto, for your 2015 Ecoboost Mustang is an excellent insurance against carbon build up in your engine, especially a boosted engine like the EcoBoost. This is going to be a direct fit on your 2015 EcoBoost Mustang and actually comes with factory style fittings and both right angle and straight fittings for the separator itself, making for an easy direct fit installation. The mounting bracket's included and this 1661 built aluminum separator itself features internal baffles.

To drain the separator, I'm simply going to unscrew the canister, and you can see inside it features an o-ring as well as the internal baffle and a screen.

Make sure you check out Cjponyparts.com for a complete selection of Mishimoto parts for your EcoBoost Mustang.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.