Modern Driveline Hydraulic Clutch Master Cylinder Kit T5/TKO 1967-1968

Modern Driveline:
MD-910-0012
Modern Driveline Hydraulic Clutch Master Cylinder Kit T5/TKO 1967-1968 is rated 4.3 out of 5 by 4.
  • y_2019, m_10, d_20, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HCM2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 143.55ms
  • REVIEWS, PRODUCT

Highlights

  • Reduced Pedal Effort
  • Increasing Pedal Feel
  • Bolts To Firewall
  • Drilling Required
$295.99

Modern Driveline Hydraulic Clutch Master Cylinder Kit for 1967-1968 Mustangs with a T5 or TKO Transmission.

Switch out your 1967-1968 Mustang's stock style clutch master cylinder with this high quality hydraulic master cylinder kit (MD-910-0012) from Modern Driveline! This kit will help reduce pedal effort while increasing pedal feel.

To get the proper pedal pressure and stroke the cylinder needed to be raised higher than the stock clutch rod linkage hole. Interference issues prevents this in many Mustangs. Secondly, if the cylinder was mounted through the existing clutch rod hole, the pedal pressure was excessive.

*This kit is designed to work with a hydraulic throw-out bearing.

Please Note: This Modern Driveline Hydraulic Clutch Conversion kit is designed to work on manual brakes and for power brakes that are using the original style booster. This Modern Driveline Kit may not work with aftermarket boosters as they might interfere with the mounts that come through the firewall.

The cylinder in this newly designed system is resized and optimized for this use. Its small sizeinsures it will fit in the majority of applications. Mechanical linkage was added which makes it possible to use the clutch rod hole and provides mechanical advantage, thus reducing the pedal pressure required to operate the clutch. A remote fluid reservoir is included.

Modern Driveline was a company that was created out of a need, a need for classic Mustangs and other automobiles to be equipped with modern transmission and driveline equipment that would make driving a classic Mustang a more enjoyable experience for the non-performance driver. If you are looking to equip your classic coupe, fastback or convertible Mustang with a new piece of transmission equipment, or even a full T5 transmission conversion kit, CJ Pony Parts provides all the Modern Driveline equipment you could need.

Order a new Modern Driveline (MD-910-0012) Hydraulic Clutch Master Cylinder Kit for your 1967-1968 Mustang with a T5 or TKO Transmission from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 3 out of 5 by from Modern Driveline needs to provide a template A template for firewall install would greatly help. In drilling and locating the holes, a template would really help. Easy to locate the install holes from the driver interior side, but hard to drill both holes from there. Hard to locate the holes from the engine compartment side, but easier to drill one of the holes from here IF yu have a template. The instructions are fair.
Date published: 2016-12-30
Rated 5 out of 5 by from Perfect solution! Hazzle free overseas transaction and fast shipping! The parts were ordered to be used in a AC MK IV instead of a Mustang and work perfectly! Good quality parts and instruction manual.
Date published: 2015-09-01
Rated 4 out of 5 by from Only one bad thing this comes with a 3/8 x 24 straight thread fitting you have to use a oring seal with, and a 4an fitting, that I found hard as heck to cross to 3/16 tubing. Only big problem.
Date published: 2019-04-11
Rated 5 out of 5 by from Very high quality EZ to install , and operates very good. With this kit, you use the hole that is already in fire wall.
Date published: 2015-01-08
  • y_2019, m_10, d_20, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HCM2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.56ms
  • REVIEWS, PRODUCT

Will this work with the MT82, factory 6 speed from a 2013 GT?

Asked by: Stiggy
No it will not.
Answered by: rk cjpp
Date published: 2019-02-22

Can I just buy the plate and linkage Dan Elbe 7752095250,thanks

Asked by: Dalton5150
Sorry this is only available as a complete kit.
Answered by: rk cjpp
Date published: 2018-09-04

I have these kit with master sylinder and hydraulic tilton 600 trow out bearing for my Toploader but i need the linkage kit with everything i need from pedal to firewall,can i order from you?

Asked by: Cobra426
Please call toll free at 1-800-888-6473 and speak with a sales rep. I'm not sure which parts you are referring to since the kit comes with the linkage from the master to the pedal.
Answered by: rk cjpp
Date published: 2018-12-31

HI. im trying to get a t5 conversion kit, but i didn't see the slave cylinder on this kit! any idea how i can get the full kit? thanks

Asked by: mikel714
Here is the link.
Answered by: rk cjpp
Date published: 2018-12-31

I have a To loader 4 speed T10. This kit applies for this model?

Asked by: CAGROCCA
No it does not.
Answered by: rk cjpp
Date published: 2017-03-29

Hi, You mentioned this will not work with a top load gearbox. Can you give a rewason why? I am running the slave cylinder on the input shaft and the effort to depress the clutch pedal is huge. Is the reason travel ratio? Greg

Asked by: Greg
Yes that would be the reason.
Answered by: rk cjpp
Date published: 2016-04-11

Will this kit work with my toploader and if so what else will I need to get a modern clutch set up

Asked by: Vmac
It doesn't fit toploaders, unfortunately.
Answered by: CJ Pony Parts
Date published: 2015-09-02

will this kit work with the tremec 3550 6 speed

Asked by: dariususmc
I won't. Look up CJ part # HCC8, which might be a better fit for your Mustang.
Answered by: CJ Pony Parts
Date published: 2019-05-01
  • y_2019, m_10, d_20, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_HCM2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 157.89ms
  • QUESTIONS, PRODUCT