Mopar Grab Handle Front Pair Jeep Wrangler JK 2018/ JL 2018-2021/Gladiator 2020-2021



  • Sold As A Pair
  • Aids In Entering Lifted Jeeps
  • Easy Installation
  • Direct Fit

Pair of Mopar Front Grab Handles for 2018 Jeep JK Wranglers, 2018, 2019, 2020 and 2021 JL Wranglers and 2020-2021 Gladiators.

Getting in and out of your Jeep JL or JK Wrangler or your Gladiator, especially if it is lifted, can be a difficult task for some. Not to worry, here at CJ Pony Parts we offer this Pair of Mopar Front Grab Handles (82215523AC) to lend a helping hand!

These Front Grab Handles from Mopar come as a pair to complete the front driver side and passenger side of your new Jeep. They are easy to install and attach to the sport bar of the front doors. The handles are constructed of steel with a sculpted over-mold handle to provide a comfortable grabbing point.

Features and Benefits:
- Sold as a pair
- Easily attaches to the sport bar
- Made from steel with sculpted over-mold handles

Please Note: These grab handles fit all Jeep Wrangler JLs with a hard or soft top, but will NOT fit JLs with a power soft top.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're going to make it much easier to get in and out of your JL Wrangler.

If you're looking for an easy way to get in and out of your JL, today we're going to be installing these Mopar front grab handles onto our 2018 Jeep JL Wrangler.

These Mopar grab handles feature a durable plastic center construction with a honeycomb design including the Jeep grill. They feature a nylon webbing, which is going to be rated for a lot of weight. As well as the plastic clips that go around your roll bar and attach with a factory bolt. This is a super easy installation, and it's going to make getting in and out very easy. With that being said, let's get them installed in our 2018 Jeep Wrangler JL.

The installation is going to be right up top here on the inside of your roll cage. We actually removed our T-tops or freedom panels as you might call them, just to make it a little bit easier for us, and for you guys to see it. There's two T25 Torx bits on the inside of this roll cage. We're going to pop those out, slide the grab handles over them, and then reinstall them.

As soon as I get this one pulled out, I'm going to put the grab handle up into place from the outside towards the inside. It'll slide over that hole. And then the screw can be reinstalled. Get it nice and snug and then we'll move on to the rear here. Repeat the same in the rear, go ahead and slip this over the roll bar, then reinstall your hardware. Do the exact same process on the other side, and your process is complete.

As you can tell, we just wrapped up the installation of these Mopar JL grab handles onto the front end of our 2018. These look really nice, plus it only takes a T25 Torx bit and about 10 minutes of your time, and before you know it you'll be able to get in and out of here super easy.

Now you can find these as well as many other great parts for your JL right here at

Vehicle Fitment

This product will fit the following Gladiator years:

  • 2020,
  • 2021,

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.