Mopar Grab Handle Rear Pair 4-Door Jeep Wrangler JL 2018-2020/Gladiator 2020

Mopar:
82215524AB
Rating:
100% of 100

Highlights

  • Sold As A Pair
  • Aids In Entering Lifted Jeeps
  • Easy Installation
  • Direct Fit
$39.99

Pair of Mopar Rear Grab Handles for 2018, 2019 and 2020 4-Door Jeep JL Wranglers and 2020 Jeep Gladiators.

Getting in and out of the rear of your 2018-2020 4-Door Jeep JL Wrangler or 2020 Jeep Gladiator, especially if it is lifted, can be a difficult task for your passengers. Not to worry, here at CJ Pony Parts we offer this Pair of Mopar Rear Grab Handles to lend a helping hand!

This Rear Grab Handles from Mopar come as a pair to complete the rear driver side and passenger side of your all-new 4-door JL Wrangler or Gladiator. They are easy to install and attach to the sport bar of the rear doors. The handles are constructed from steel with a sculpted over mold handle to provide a comfortable grabbing point.

Mopar Rear Grab Handles 82215524AB Features and Benefits:
- Sold as a pair
- Easily attaches to the sport bar
- Made from steel with sculpted over-mold handles

Please Note: Will NOT fit JLs with a power soft top.

CJ Pony Parts carries a wide assortment of Jeep parts and Jeep accessories designed specifically for your Wrangler or Gladiator. From lighting and suspension to exhaust and other accessories, CJ's has what you need to easily upgrade your Jeep.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We're going to help your passengers get in and out of your JL Wrangler.

If you're looking for an easy way to help your passengers get in and out of the rear of your four door JL, today we're going to be installing these Mopar grab handles on the back end of our 2018 Jeep JL Wrangler. These Mopar grab handles feature a durable plastic center section with the Jeep logo, as well as the honeycomb design. They have a nylon web strap which is rated for a lot of weight to help your passengers get in and out. The plastic ends on either side surround a metal construction underneath, which is going to be very durable over the lifetime of your jeep. Now they simply bolt on using factory screws, so with that being said, we're going to get them installed on our 2018 Jeep JL Wrangler.

You can install these rear grab handles with the top either on or off. Probably make it a little bit easier if it was off, but it is winter time so we're going to leave it on there. The only tool you need to get started is a T25 TORX bit, and you're going to pull out these two screws right behind me on the roll cage, and then put your grab handles on and then reinstall them. So let's get started.

After you get that front bolt out I like to put the grab handle up into place, just get one of them started, that way it hangs there on its own.

After they're nice and tight I'm going to move on and loosen up this rear bolt.

Pull that screw out, same as the front, go ahead and slide the bracket over, then reinstall the hardware into that hole, then tighten it up.

Once you have it nice and tight, repeat the same process on the other side and your installation's complete.

As you can see above me, we just wrapped up the installation of these Mopar rear JL grab handles. This is a really nice feature to the back end of the Jeep. There is a grab handle up front, however this will make getting out and hanging on when you're out on the trails nice and easy. It only takes a T25 TORX bit to get them installed, and you can find them right here, along with many other great parts for your JL, at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Gladiator years:

  • 2020

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.