Mopar Hitch Receiver Assembly Kit Jeep Wrangler JL 2018-2020

Mopar:
82215209
Rating:
81% of 100

Highlights

  • Double Layer E-Coat Finish
  • 3500lb Towing Capacity
  • No Cutting Required
  • Includes Necessary Hardware
MSRP $200.00
$157.99
You save 21%

Mopar Hitch Receiver Assembly Kit for 2018, 2019 and 2020 Jeep JL Wranglers.

If you can’t wait to start adding aftermarket items to your 2018-2020 JL Wrangler, start with this Mopar Hitch Receiver Assembly Kit (82215209). This receiver has a 3,500 lb. towing capacity with 350 lb. tongue weight capacity to give added function to your new JL.

Features & Benefits:
- Receives two-layered E-coated paint finish to resist rust
- 3,500 lb. towing capacity with 350 lb. tongue weight capacity
- No trimming or cutting required for installation
- Passes FCA US LLC extensive road testing

Kit Includes:
- Hitch
- Hitch cover
- Mounting Hardware

This Mopar Hitch Receiver will match your JL’s towing capacity when properly equipped. This receiver is finished with two layers of E-coated paint to ensure the hitch will resist rust. Mopar guarantees this hitch to pass FCA US LLC extensive road testing, which means this assembly delivers superior durability and strength. This Class 2 Hitch Receiver has a 3,500 lb. towing capacity with 350 lb. tongue weight capacity. No trimming or cutting of the rear bumper or fascia is required to install.

Please Note: Check your owner’s manual for load capacity and ratings. Do not exceed rated tow capacity of vehicle stated in the owner’s manual.

Order a Mopar (82215209) Hitch Receiver Assembly Kit for your 2018, 2019 or 2020 Jeep JL Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're going to show you how to haul in your JL Wrangler. If you're looking to tow with your Jeep Wrangler or add a great recover point to the rear, today we're going to be installing this Mopar Trailer Hitch Assembly fitting your 2018 JL Wrangler, equipped with a plastic rear bumper. This factor Mopar Hitch Kit includes everything necessary to get it bolted up on you JL Wrangler, equipped with a plastic rear bumper. It features a durable steel construction and a powder coated rear hitch with all the necessary bolts and nuts to get it bolted up. It also includes this nice hitch cover plug for when the hitch is not in use, giving it a nice clean feature and allowing no dirt of grim to get in through the front end. With that being said, our JL Wrangler could really use a rear hitch, so let's get it installed.

As you can see, we have our JL up on the lift. This isn't necessary to get it installed, however, it makes it easier for you guys to see what we're doing. There's nothing here to begin with, so we're going to get started by putting our hitch into place. Set your hitch up into place, and I like to put this last bolt in through the rear up towards the front. It's going to let it swing there and just hang by itself. That way I can get the rest of the bolts in. Swing it up into place. Then, put another bolt on the outside here. And then for the center, there's actually two welded on nuts. You're going to put the bolts in the exact same way. Go ahead and put the bolts through this center here. Just get them loosely started. We'll come back and get everything tightened down.

Once you have them all started, put the nuts on the outside of both of them and we'll get them tightened down. In order to put the included nuts on the outer two bolts, then we can come back and get them tightened down with an 18 millimeter socket and 18 millimeter wrench. Now, we're going to go ahead and get them all tightened down. After they're all tight, go ahead and put the hitch cover on by putting this retention strap around the back. This will allow the hitch cover to stay on when you are using the hitch and you won't lose it. Just get it set on there nice. Put it right in the hitch, and you're installation is complete.

We just wrapped up the installation of this Mopar Trailer Hitch Kit onto our 2018 JL Wrangler. This is a really great kit. It includes everything you need to get it installed, plus it only requires an 18 millimeter socket and a box wrench to get it done. The nice hitch cover that you can put on will prevent debris from getting inside there, and gives it a really clean finished look. Now, you can find it right here, as well as many other great parts for your brand new JL, at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.