Mopar LED Headlight Kit Jeep Wrangler JK 2007-2018
Mopar LED Headlight Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Upgrade your 2007-2018 Jeep Wrangler JK with Mopar's LED Headlight Kit! Mopar LED headlights come factory on 2017 Rubicon and Sahara Edition Jeep Wranglers. They can be installed on any 2007-2018 Jeep Wrangler as factory-looking and functioning components. They include the original H13 adapter on the back of the housing to make them a plug-and-play installation. These headlights will drastically improve the less than stellar output of typical Wrangler halogen bulbs while using a considerably lower amount of power.
Mopar's LED Headlight Kit (6830451) Includes:
- Two (2) Headlight Buckets (Driver & Passenger Side)
- Two (2) Mopar LED Headlights (Driver & Passenger Side)
- Two (2) Trim Rings (Driver & Passenger Side)
Tech Tip: Due to the LED bulbs, your factory computer's PWM electrical system may cause the lights to flicker during usage. This problem can be addressed at your local Jeep Dealer by having the system re-flashed and updated to make your system register the addition of your new headlights.
For eight decades, the name Mopar has been synonymous with quality and reliable auto parts. By using state-of-the-art technology and customer-friendly initiatives, Mopar has remained a popular entity in the automotive community, and the company is constantly evolving to meet the wide-range of customer needs around the globe.
Order Mopar's 6830451 LED Headlight Kit for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
These headlights are pretty simple to install. The first thing we obviously did was pop the hood. Now, we're going to remove the six clips that hold on the grill. Once you remove all the clips, you can grab onto the grill and pull it out of its tabs and let it lay forward. We're going to remove the four screws on the headlight retainer so we can get more room on the screws that actually secure the headlight bucket in. The screws are a T15.
Once all four screws are removed, you can remove the headlight and disconnect it from the harness. Once the headlight's removed, this headlight bucket just pulls right off from its three locations here, here, and here. We're going to lubricate them with a little bit of WD-40 just to make it a little easier to remove. Grab the headlight bucket here and up top, and then just pull right off.
Grab the headlight that says RH and install this on the passenger's side of the Jeep. Plug it into the factory headlight harness. Line it up with the three tabs that you pulled the factory one off of. Once you get all three lined up, push it on. Once you get the headlight installed and it's securely on all three tabs, you can repeat the process for the other side. Once you get both headlights installed, you can reinstall the grill, and your installation's finished.
Okay. We've got our Mopar LED headlights installed. They definitely look a lot better than the factory headlights. They really give the front end of this Jeep a premium look. They're very, very classy-looking. Installation's not too bad. It should only take you about 30 to 45 minutes, and before you know it, you'll be heading off-road.