Mopar Rear Splash Guard Pair Sport/Sahara Jeep Wrangler JL 2018-2019

Mopar:
82215333
Rating:
90% of 100

Highlights

  • Fits 2 Or 4 Door JL Wranglers
  • Features Jeep Logo
  • Textured Black Finish
  • Molded Plastic Construction
MSRP $54.99
$49.49
You save 10%

Pair of Mopar Rear Splash Guards for 2018-2019 Sport and Sahara model Jeep JL Wranglers.

Give your 2018-2019 Sport or Sahara Jeep JL Wrangler an extra layer of protection against water, mud, snow, and rocks flying up and hitting your Jeep JL Wrangler with this Pair of Mopar Rear Splash Guards from CJ Pony Parts!

Mopar Rear Splash Guards 82215333 Features and Benefits:
- Completes rear driver and passenger sides
- Molded Design
- Tough and durable
- Protects your JL's undercarriage
- Adds custom styling to your rig
- Can be painted
- Easy installation

These molded Rear Splash Guards from Mopar will complete the rear driver and passenger side of your 2018-2019 JL Wrangler Sahara or Sport. They are tested to all corporate standards to ensure that they have the durability to stand up to the everyday rigors of driving. This pair of splash guards not only protect the lower body of your JL, but they also add a great custom style with a black finish that can be painted to match your Jeep!

Please Note: These splash guards will NOT fit Jeep JL Wranglers that are equipped with rock rails. They will NOT fit Rubicon model Jeep Wranglers due to the factory-installed rock rails.

CJ Pony Parts carries a wide assortment of Jeep parts and Jeep accessories designed specifically for your JL. From lighting and suspension to exhaust and other accessories, CJ's has what you need to easily upgrade your Wrangler.

Order this Pair of Mopar 82215333 Rear Splash Guards for your 2018 or 2019 Sport or Sahara Jeep JL Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today we're going to give you some more protection to your new JL. If you take your Jeep out on the trail and pick up any rocks or other debris, and don't want to hit people behind you with it, then today we're going to be installing these Mopar Rear Splash Guards fitting your new 2018 Jeep Wrangler JL. These Mopar Rear Splash Guards come in a pair to complete both the driver and passenger sides of your new JL. They feature a durable, molded black design, that's going to match your fender flares and your factory bumper. These splash guards can be painted. They're a super easy installation. With that being said, let's throw them on to our 2018 JL.

Tools needed for this installation, 1/4" ratchet, 8mm socket, 1/4" drill bit, drill, and a rivet installation tool. To get started with this installation we've actually removed the wheel and tire just to make it a little bit easier for you guys to see what we're doing. There's an 8mm bolt right back here on the back of the fender area. It kind of connects to the bumper. Let's get started removing that. Grab an eight millimeter socket and remove this bolt here. Hang on to that. You're going to use it when you reinstall the splash guards. Another tip for installing these splash guards, is to actually remove these two and work underneath here and we'll show you what to do.

A little trick for getting this installed is to actually remove this and flip it upside down. This is going to give you more distance to grab on with that screw. Once you put the splash guard over that piece of other filler plate, it causes a little bit more gap and it doesn't really grab if you have it like this. Flip that around and you'll be completely fine. It simply pulls off. Then pushes back on like that. Now, it might look like it's bigger there, but that'll actually protrude through that filler plate and give you enough grab to get into the threads and pull it tight.

The next step is going to be to drill out these three holes. That way, we can install our rivets. I like to pull this tight against the bumper to get this first hole drilled. Use a 1/4" drill bit. Line it up. Nice and easy plastic, it'll go right through. Notice how it popped back. Once you put the rivet in, we'll put it, get that one installed. Then we'll drill the other two and get those two installed. We have the rivet inside of our rivet gun. This is a pretty nice tool to use when you're doing this. If you don't have one, you can normally borrow it from your local auto parts store or a hardware store. It makes it super simple, and even cuts it and gives you a nice clean finish. With the last rivet installed, make sure you complete the exact same steps on the other side. That completes your installation.

We just finished up the install of the all new JL Splash Guards on the back of our new Wrangler. These things look really awesome. They match the black of the bumper and the fender. Plus, it only takes about 30 minutes to get them installed. Now, you can find these splash guards, as well as, many other great parts for your brand new JL right here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.