Mopar Tailgate Table Multi-Purpose Jeep Wrangler JL 2018-2021

Mopar:
82215416AD
Rating:
98% of 100

Highlights

  • Aluminum Construction
  • Stainless Steel Hardware
  • Folds Up Vertically
  • Easy Installation
$268.99

Mopar Multi-Purpose Tailgate Table for 2018, 2019, 2020 and 2021 Jeep JL Wranglers.

Whether you’re heading out on the trail, to the job site or prepping for the big game, this Mopar Multi-Purpose Tailgate Table (82215416AD) will give you the surface area you’re looking for. Designed to be large enough to accommodate your needs, this tailgate table easily stores without requiring you to sacrifice valuable cargo space in your 2018-2021 Jeep JL Wrangler!

Features and Benefits:
- Constructed of lightweight aluminum
- Stainless steel hardware
- Large table surface
- Two cup holders
- Folds up vertically
- Will not hamper cargo area
- Additional slots and holes for accessory attachment
- Easily installs

Constructed of lightweight aluminum, this tailgate table includes stainless steel hardware to ensure a tight installation. To truly function as a multi-purpose table, this aftermarket upgrade features two cup holders and multiple slots and holes for easy accessory attachment. When you’re done with your new tailgate table, it folds up against the inner portion of your JL’s tailgate to securely store without chewing up space in your cargo area.

Vehicle Fitment:
- 2018-2021 Jeep JL Wrangler

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We're going to show you how to make your Jeep more functional, when you're out on the trail.

If you like to take your Jeep off road, or even go camping with it and want to utilize every square inch of the interior, today we're going to be installing this Mopar tailgate table onto our 2018 Jeep Wrangler JL.

This Mopar tailgate table is a great option if you like to take your Jeep off road, and are looking for a nice surface to store any of the things you want to get prepared, say a meal or even two cups. It's constructed of a durable and light-weight aluminum, and then powder coated in a satin black, to give it a really nice sleek finish. It features the Willy's emblem on top of it, so when it's open you know that it's a Jeep product.

We're going to get it installed on our 2018 Jeep Wrangler JL, give it a try. Tools we need for this installation, plastic pry bar, 13 millimeter drill-bit, drill, 3/8th inch ratchet, 10 millimeter socket, and a T40 Torx bit.

We're going to be putting the tail gate table right here on the inside of our tailgate. The first step is to get this plastic trip removed. We're going to use a plastic trim removal tool, work around the edges to get this popped off.

Start in the lower corner here, there's actually a nice cut-out for the wiring. You can get your pry bar right underneath the corner pretty easily, and you'll hear it pop. We're just going to work our way around the edge, get them all popped off.

In case any of these little green plastic clips hung on for the ride, go ahead and pull them out and put them back on the pins on the inside where they pulled out of.

Flip the inside of the tail gate panel around and there's four holes you have to drill out. There's going to be two holes right up here inside of this, and then there's two notches right down here. One in the corner, and one next to this clip. Drill them out to a 13 millimeter hole.

With all four of the holes drilled, you can now pop the panel back on. Just give it a nice push all around the perimeter. Now you're going to install the four aluminum spacers that included with the kit. There's three of them that are the exact same size, and then one that's a little bit longer. The one that's longer is going to go in the bottom left hand corner, while the other three are going to go in the three remaining. Slide the longest one in, and as you can see it just kind of sits there, you're actually going to put a bolt and lock washer through there once the panel's on.

What we're going to do is set the inside of the bracket in, you can see the little Willy's Jeep cut out, it's going to go in the upper right hand corner. Grab your hardware with a lock washer on it, put it into the spacers, and they should start right behind there. There's actually a threaded stud in there. Once I get two of them started I'm going to put the two in the bottom. Finally, put this last one in over here in the corner.

Go ahead and use a T30 Torx bit to go around the perimeter and tighten down all of these four Torx screws. So the tailgate panel is going to sit like this when it's fully assembled, meaning that these two corners are going to be in the lower half. You'll be able to see the warning label here and have your cup holders on either side.

To properly mount this, what you're going to do is use the included hardware, go through from the outside, place the nylon spacer in between, slide the inner bracket on, and then we're going to put a nut on there. We're going to repeat the same process on the other side. Place the nylon spacer in between the two brackets. Get these bolts tightened down with a 10 millimeter box wrench and a T30 Torx bit. Repeat the same process on the back side.

Now we can drop down the table and connect the cables. Lay the table down, just to about level, and then go ahead and grab these cables. What you're going to do is just loop them around this stud. We're going to have to pick up on it a little bit. Do that on both sides. Now you can let your panel down, your install is complete.

As you can see, we just finished up or Mopar tailgate table. This is a really awesome piece to have, plus this is exactly what it's perfect for, I've got my lunch spread out on here. It's going to be great for tools or anything else you're looking to store. It also has attachments on the outside to fit a molly bag, which is typical in the military. Put it on the outside and store whatever you need to.

The install only took about an hour, and there's only a little bit of drilling required. Now you can find this part as well as many other great parts for your JL, right here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.