Mopar Tubular Grille Guard For Steel Rubicon Bumper Jeep Wrangler JL 2018-2020/ Gladiator 2020

Mopar:
82215351
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.15ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Black Powder-Coated Finish
  • Bolt-On Installation
  • Protects The Grille
  • Fits Steel Front Bumpers Only
$249.99

Mopar Tubular Grille Guard for 2018, 2019 and 2020 Jeep JL Wranglers and all 2020 Jeep Gladiators Equipped with a Factory Steel Rubicon Front Bumper.

If you’re an off-roading fanatic, you know the importance of protecting the grille on your 2018-2020 Rubicon Edition JL Wrangler or your 2020 Jeep Gladiator. This Tubular Grille Guard (82215351) from Mopar will protect your grille from any damage that could happen on the trails.

Features and Benefits:
- Made from premium 2” steel
- Black powder-coated finish
- Simple bolt-on installation

This Tubular Grille Guard is perfectly designed to match the contours of your front grille and bumper. This rugged guard helps protect the grille from any off-road damage. Made from 2” steel, this guard comes in a black powder-coated finish. Installation is simple since it bolts directly to the stock steel front bumper with no drilling or modifications needed.

Additional Notes:
- This tubular grille guard is designed to bolt directly to the factory steel JL Rubicon bumper only.
- These products are designed to enhance the appearance of your Wrangler or Gladiator, they are not intended to prevent injury or damage in the event of an accident and are not intended to be used as a tie-down device.

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Gladiator years:

  • 2020

This product will fit the following Wrangler years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.85ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

My 2020 glaidator is not the same as your instructional info. I have one hole on the top of my bumper. Will this work?

Asked by: John S
No it will not.
Answered by: rk cjpp
Date published: 2019-12-30

Will this bumper guard fit if there is a winch installed?

Asked by: kevinktwo
No it will not.
Answered by: rk cjpp
Date published: 2019-07-01

Does this guard come with the bolts/hardware to secure it to the factory steel bumper?

Asked by: kevinktwo
Yes it does.
Answered by: rk cjpp
Date published: 2019-07-01
  • y_2020, m_1, d_28, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_82215351, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 135.71ms
  • QUESTIONS, PRODUCT