MSD Distributor Ready-To-Run Pro Billet With Rev Limiter 351C/429/460

MSD: 8350
MSRP: $463.95
CJ's Low Price:
1508716800 64369
When you order a new distributor you might want to purchase the items listed below.
CJ's Low Price:
CJ's Low Price:
Earn 416 RPM Points What's this?
MSD Distributor Ready-To-Run Pro Billet With Rev Limiter 351C/429/460

Product Description

MSD Pro Billet Ready-To-Run Distributor with a Rev Limiter for 351C, 429 and 460 Engines.

Are you looking for a performance distributor that will easily install in your 351C, 429 or 460 Engine? If so this high quality distributor from MSD is for you. This billet aluminum distributor installs by dropping the new distributor and wiring three wires making it a Ready-To-Run Unit.

- Easy Installation
- Powerful Built-in Module
- Easy-to-Adjust Mechanical Advance
- Vacuum Advance Canister
- CNC Machined Billet Housing
- Maintenance-Free Magnetic Pickup
- Polished Steel Shaft
- Mechanical Advance Assembly
- CARB E.O. Approved
- Built-in Rev Limiter

*This MSD Distributor does not require an MSD Ignition Control

MSD installs a module that is built into the distributor, this helps produces a 7.5 amp single spark through the higher rpm range. The improved spark output results in quicker starts, better throttle response and ideal reliability. A vacuum advance canister is installed on this distributor, this helps with fuel economy on those local car cruises. MSD properly places the mechanical advance assembly on top of the distributor making it easy to adjust the advance for your different driving styles.

When you purchase this distributor you will need to set the Rev Limiter, this is achieved with a factory tachometer or and aftermarket tachometer. With a built-in rev limiter will keep your engine safe from over-rev in the case of missed shifts or drive-line failure. The Distributor can adjust the Rev Limiter from 2,000 to 10,000 RPM. A Switch can be installed in the cabin of your Mustang making it easy to use.

If you are looking to improve the ignition system of your Mustang, then CJ Pony Parts has a wide range of MSD ignition components and fuel system equipment that are sure to correct any problem you may have. MSD is one of the Mustang aftermarket's leading manufacturers of ignition controls, coils, timing accessories, spark plug wires and electronic fuel injection conversion equipment.

Order a new MSD Pro Billet Ready-To-Run Distributor with a Rev Limiter for your 351C, 429 or 460 Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Distributors  

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 118.58ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Will this allow the tach to work in a 1973 ford mustang

Asked by: darwyn
The Ready-to-Run Distributor features a Gray Tach Output wire which provides a clean signal for most tachometers and even some aftermarket fuel injection systems. The signal output is a 12 volt square wave, 20° duty cycle. This wire is also responsible for programming the built-in rev limiter.
Answered by: rk cjpp
Date published: 2017-10-03

will this work in a 1996 ford f250 with 7.5 liter engine,

Asked by: dannyb52
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2017-07-10
  • y_2017, m_10, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_MSD8350, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.6ms

You Might Also Like