Mustang California Special Lower Honeycomb Grille Insert (2007-2009) Installation

2007-2009 Mustang Silverhorse Racing Lower Honeycomb Grille Insert

This Lower Honeycomb Grille Insert from Silverhorse Racing fits 2007-2009 California Special and Shelby GT Mustangs.

Designed for quick, snap-in installation, this Silverhorse Racing Lower Honeycomb Grille Insert adds the perfect finishing touch to the front end of your Mustang, plus adds an additional layer of protection for the radiator, condenser, and auxiliary inter-coolers.

This Install Also Applies To:

• NONE

Tools Required:

• Ratchet & 5.5mm Socket

Install Difficulty:

• 
• Easy Project

1. Unpack your new Mustang Silverhorse Racing S197-200-CS Lower Honeycomb Grille Insert.

2. Remove the lower radiator cover with the 5.5mm socket and ratchet. This will provide easy access to the side covers from the front and bottom.

3. Unclip the two inboard tabs that are common to both side panels. Then, tilt those panels forward.

4. Insert the Silverhorse Racing lower grille panel in the area between the side panels and front bumper cover.

5. Push the side panels back into the Mustang front bumper cover until the tabs lock.

6. Inspect the installation to insure the Mustang grille is properly attached.

7. Reinstall the front radiator cover to complete the installation of your new Mustang California Special Silverhorse Racing Lower Honeycomb Grille Insert.