Mustang Mach 1 Grille Delete Kit (1999-2004) Installation Instructions
1999-2004 Mustang Mach 1 Grille Delete Kit
The Mach 1 Grille Delete Kit will fit all 1999-2004 Mustangs.
The Mach 1 Grille Delete Kit gives any 1999-2004 Mustang the distinctive look of the 2003-2004 Mach 1 by eliminating the honeycomb grille and the "corral" around the pony emblem. It includes the grille delete panel and the running panel emblem with bracket.
The Mach 1 Grille Delete Kit will fit all 1999-2004 Mustangs.
The Mach 1 Grille Delete Kit gives any 1999-2004 Mustang the distinctive look of the 2003-2004 Mach 1 by eliminating the honeycomb grille and the "corral" around the pony emblem. It includes the grille delete panel and the running panel emblem with bracket.
Tools Required:
- Phillips Head Screw Driver
- 7mm Socket & Ratchet
Install Difficulty:
- Easy Project
1. To begin installing your new Mustang Mach 1 Grille Delete Kit, pop open your hood to gain access to your old grille.

2. Remove the four push pins that attach your grille to your Mustang radiator cover. Then, remove the two push pins on the top of the bumper cover.

3. Tilt your factory grille slightly forward and use the 7mm ratchet to remove the four bolts on the bottom of the grille that holds it to the bumper.

4. Now you can remove your Mustang grille by simply pulling it out.

5. Install your new Mustang grille horse emblem by sliding the bracket through the opening in your grille frame then securing it using two screws.

6. Next, install the lower, black, curved plastic piece by simply sliding the two tabs under your bumper cover, then reinstall the two push pins removed earlier to keep it in place, plus the Mustang Mach 1 Grille Delete Hardware.

7. Reinstall all of the push pins that were removed earlier, then your installation of the Mustang Mach 1 Grille Delete Kit is complete!
