Mustang Taillight Panels 1964-2021
In order to stay safe on the road while driving, it is important for your Mustang taillights to not only be in working order, but to also be properly attached. When you are in the process of restoring either your First Generation or Fox Body Mustang, Ford owners must arm themselves with the proper assembly equipment for their taillights. That is where the Mustang taillight panels come into play! Ford Mustang taillight panels provide a stable mounting platform for the taillights, as well as the fuel refill pipe.
As you can imagine, water and fluids of any kind are one of the most significant detriments to your original Mustang taillight panels. Over time, water will inevitably be absorbed by the bezel gaskets and the gaskets can keep fluids trapped inside. The water infestation can damage the once-shinny finish of your Ford Mustang taillight panels and cause costly cracks and dents. Because many original Mustang taillight panels are made out of a metal substance, the material can begin to rust. Rusty and worn out Mustang taillight brackets not only leaves taillights and the rear area of your Mustang susceptible to damage, but it also dramatically brings down the curb appeal of your muscle car.
In addition to worrying about long term damage, Ford owners must also be mindful of the immediate harm that Mustang taillight panels can endure at the point of contact. If your car gets rear-ended, outside of the bumper area, the Mustang taillight brackets are likely the most at-risk areas at the point of contact.
If your Ford Mustang taillight panel is damaged in any way, no matter how small, it is possible that your taillights are not securely bolted onto the back of your car. Driving around with loose taillights not only hinder their ability to properly illuminate, but also leaves them at risk of falling off. If your Mustang taillight panel is covered with dents, bumps, or rust, it would be wise to replace it as soon as possible.
Upgrade Your Mustang Taillight Panels With Help From CJ Pony Parts
Mustang taillight panels help unite the two rear quarter panels on your Mustang coupe, convertible, or fastback. Because it is located on such an important part of the car, it is crucial for your Ford Mustang panel to be sturdy and reliable. Luckily for you, CJ Pony Parts offers a wide variety of Mustang taillight panels, as well as the necessary hardware needed to bolt them into place. CJ’s features premium Ford Mustang taillight panels for classic pony cars, as well as the sixth generation Mustangs.
The Mustang taillight panels available from CJ Pony Parts are crafted from heavy-gauge steel and are superior reproductions for your original equipment. The heavy gauge steel ensures that your aftermarket Mustang taillight panel is stronger and more durable than your factory part. Each panel is carefully shaped and cut to easily mount on your existing holes.
The new Mustang taillight panels can be installed precisely where the old one used to be, to give the rear area of your Mustang the exact same look as it had when you drove it off the lot for the first time. Make you sure that you have identified the panel that correctly corresponds with your car’s model and year before you make your final purchase from CJ Pony Parts.
In addition to Mustang taillight brackets themselves, CJ’s sells Mustang taillight panel molding, panel light braces, and taillight panel retaining kits among other items. Now that the taillights are securely in place, courtesy of the Mustang taillight panels, it is time to draw attention to the rest of your Mustang’s body & sheet metal. While you’re on the site, feel free to check out CJ’s wide array of Mustang grilles, splash shields, spoilers, and more!