Neutral Safety Switch C4/C6 12/15/1966-1969

CJ's Part Number:
SW242
Neutral Safety Switch C4/C6 12/15/1966-1969 is rated 5.0 out of 5 by 7.
  • y_2019, m_10, d_23, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_SW242, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 149.69ms
  • REVIEWS, PRODUCT

Highlights

  • Direct-Fit Replacement
  • Correct Plug Connector
  • OEM-Style Reproduction
  • Fits 1966-1969 Mustang
$48.99

Neutral Safety Switch for all 1967, 1968 and 1969 Mustangs built after December 15th, 1966 with a C4 or C6 Automatic Transmission.

If your 1967-1969 Mustang isn’t starting, one possible reason may be that the neutral safety switch has failed. Also known as a backup light switch, this neutral safety switch for 1967-1969 Mustangs built after December 15th, 1966 disables the starter operation when the c4 or c6 automatic transmission is not in neutral or park. If the engine was allowed to start in gear your Mustang would immediately begin to move once the engine started.

Problems with the neutral safety switch may present themselves as the Mustang taking multiple attempts to start, starting in the wrong gear or having to tweak the shifter in a particular way to start the engine. Prevent these sorts of problems with a brand-new neutral safety switch for your Mustang.

This neutral safety switch, or backup light switch, is an amazing reproduction of the original unit and will help keep your Mustang running as good as new. It features the two alignment holes that are correct to the factory switch.

Tech Tip: Make sure that you route the neutral safety switch wiring away from the exhaust. A common failure is caused by getting too close to the hot exhaust which can melt the wiring.

*Not for use on 1967 Mustangs built before December 15th, 1966.

Order a Neutral Safety Switch for your 1967-1969 Mustang built after December 15th, 1966 with a C4 or C6 automatic transmission from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from easy install very happy with the design and its a very close cosmetic match to original. I lined up the centerpiece slot with the position of the one in the old switch I removed - and it started the first try. no playing around with adjustments -
Date published: 2015-01-28
Rated 5 out of 5 by from Neutral switch I fitted the new switch to my 1968 mustang, fitted easily, wire the same length, the plug is very tight to fit. Worked very well. u
Date published: 2016-03-07
Rated 5 out of 5 by from Super product I bought this and waiting for few warmer days to install on my 49 F1 pickup with 351w and c6 with 9in rear
Date published: 2016-02-06
Rated 5 out of 5 by from Quality replacement part Good replacement part. The transmission shop couldn't find any. CJPony parts had it.
Date published: 2015-11-26
Rated 5 out of 5 by from Identical in every way to the original Works and looks great! No problems whatsover! My backup lights work now
Date published: 2017-12-26
Rated 5 out of 5 by from Part ordered Exactly what I ordered, came real quick, thanks, very much
Date published: 2017-04-07
Rated 5 out of 5 by from nice reproduction of original... I needed to change back up light switch. perfect fit!
Date published: 2015-12-15
  • y_2019, m_10, d_23, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_SW242, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.95ms
  • REVIEWS, PRODUCT

will oil from seal cause the switch to go bad? mine quit working after about 3 months the only thing different is oil on the switch .If I go down to 1st then back up it works part time but from park down to R then N then to D it dosent work .

Asked by: rabbit
Check the switch adjustment.
Answered by: rk cjpp
Date published: 2019-05-12

I am replace an AOD in a place of a baby C6. how can i use this and hook this to a fox body?

Asked by: Claybone
You would have to use the switch and pigtail from an AOD and splice it into the existing wiring.
Answered by: rk cjpp
Date published: 2017-12-05

does this switch work with 1976 c6 from a torino with a 460 engine?

Asked by: pops55
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2017-09-06

Is this safety switch OK to replace one on 302 Ford C6 trans ? 1968 XL.

Asked by: Padre 50
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2016-12-02
  • y_2019, m_10, d_22, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_SW242, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 113.01ms
  • QUESTIONS, PRODUCT