Oracle Lighting Headlight Bulb LED H13 Conversion Kit 6500K Jeep Wrangler JK 2007-2018 / JL 2018-2020 / Gladiator 2020
Oracle Lighting 6500K H13 LED Headlight Bulb Conversion Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers, 2018-2020 Jeep JL Wranglers and all 2020 Jeep Gladiators.
California Residents: Proposition 65 Warning
The factory headlights in your new JL Wrangler are a bit dim and can use some upgrading. So today, we're gonna look at these Oracle LED headlight lamps in the 6500K color fitting your new 2018 Jeep JL Wrangler. These LED headlights feature a 4000 lumen light output to drastically improve the lighting on your JL Wrangler. They feature a smaller bulb design to easily fit inside the housing as well as the proper H13 plus to get them right onto your new Jeep. They have an IP65 waterproof rating to let you know that they'll be great on the trail and last for many years to come. Today, we're gonna get them installed on our new 2018 Jeep JL Wrangler.
To get this installation started, we've already popped the hood and we're gonna remove the grill here. Has six pushpins at the top, just like the JK. So let's get started. The first pushpin to remove is right over here. We're gonna use a flathead screwdriver. Pull the inside of it out towards you just about half way and then we'll grab the inner part of it out. Make sure you store these in a safe place.
With all the pushpins removed at the top, the grill is now free up here. However, there are a few retention clips towards the bottom. If you pull the grill straight out towards you, you can get it free.
Now you can remove the grill. Unlike the JK, there are three 10 millimeter bolts that hold on the headlight housing. There's one up top here at the left, one over here, and then one down below. We're gonna get those pulled out. That way. We have access to the back of the housing.
Go ahead and pull the headlight housing out towards you and we're gonna disconnect the wiring harness.
We have the factory headlight assembly here on the table and in order to get the old bulb out and replace it with the LED, we have to go to the back here and twist this counter clockwise and that will give us access to the bulb. There's a little gray pushpin. You have to pull that out towards you and then push on the inside of this darker gray and the clip will come right out. Now in order to get the headlight out, you have to twist this counter clockwise and pull it right out towards you. Now we can plug the H13 connection in. I'll put the little gray clasp down and before we put the bulb into the housing, we're gonna tuck all this away inside here.
Then you're ready to put your bulb in. Twist it around and you'll feel a slot that it drops into and then you'll tighten it clockwise. We'll get this tucked in there too.
It looks a little bit tight with all this. But this will allow us to get this cap back onto the housing to make it completely waterproof.
Now you're ready to put it back into the jeep. Go ahead and plug in your factory connection.
Then we're gonna put it back into the factory location. There's a little guide on this one here to get it in the right spot. You can reinstall the hardware now. Reinstall your three 10 millimeter bolts.
Repeat the same process on the other side and then we can go ahead and reinstall our grill. As you can see here, we have a side by side comparison of the factory bulbs and our new Oracle LED lights. The Oracle lights are much brighter and more crisp and I think they look really great on the jeep. We're about 15 feet away from the wall here. The Oracle's on the left and as you can see, it's a much whiter light. It's got more crisp cut off lines and it just looks better. Onc you have both lights installed, then you can reinstall your grill.
Reinstall all six pushpins and your installation is complete.
We just finished up the installation of the Oracle LED headlights on our 2018 JL Wrangler. They look really great. They're a huge upgrade over the factory lights and you only need a flathead screwdriver and a 10 millimeter socket. Now you can find these LED headlights as well as many other great parts for your new 2018 JL Wrangler right here at CJPonyParts.com.