Oracle Lighting Headlight Halo Ring Kit LED 7" Waterproof ColorSHIFT Jeep Wrangler TJ 1997-2006/ JK 2007-2018

Oracle Lighting:
MSRP $309.00
You save 10%

Oracle Lighting ColorSHIFT Waterproof 7" LED Headlight Halo Ring Kit for all 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006 Jeep TJ Wranglers, and for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

This ColorSHIFT Waterproof 7" LED Headlight Halo Ring Kit from Oracle Lighting will add a unique, custom touch to your 1997-2006 Jeep TJ Wrangler or your 2007-2018 Jeep Wrangler. Your TJ or JK will surely turn heads with this bold style upgrade!

Halo Ring Kit Includes:
- Two (2) waterproof multi-color LED headlight halo rings
- Two (2) quick connect wiring adapters
- Two (2) wide voltage external LED drivers
- Remote for changing colors

These halo rings can easily be installed onto your TJ or JK. They are resin injected, resulting in an IP67 waterproof rating and will operate properly in all weather conditions! This halo kit is CAD designed to install onto the outside of the headlights of your Jeep. It is 12V powered and can be wired to a controller, switch or parking light wiring harness. A remote is supplied to change the color of the halos.

Features and Benefits of the Oracle Lighting White Waterproof 7" LED Headlight Halo Ring Kit (3943-001):
- Sold as a pair of two (2) to complete driver and passenger side headlights
- Will operate in all weather conditions
- Resin injected for an IP67 waterproof rating
- CAD designed to install onto the outside of your Jeep's headlights
- 12V powered
- Can be wired to a controller, switch or parking light harness
- Uses only a little amount of power
- Bright and brilliant light output
- Easy to install with supplied extra strength 3M self-adhesive tape

Oracle's SMD (surface mount diode) halos use a special type of advanced type LED chip which can produce bright and brilliant light output while using a very small amount of power. The SMD chips are installed onto a CAD designed six-layer PCB (printed circuit board), which is very sturdy and won't break under pressure. The PCB design can easily be mounted using the extra strength 3M self-adhesive tape.

The ColorSHIFT halos feature high-powered 5050 RGB 3-Chip LEDs electro-soldered with computer accuracy to the PCB. Each 5050 SMD contains three 3528 LEDs (one red, one blue and one green diode in each LED). This allows you to make consistent colors such as pure white without seeing the individual colored LEDs on the ring. This type of 5050 3-Chip LED is a premium-quality SMD with a 50,000-hour lifetime rating.

Oracle Lighting has been in business for just over a decade, but in that time has established themselves as one of the industry leaders in lighting. Oracle Lighting has adopted the latest in LED lighting technology as their preferred medium, and they have created some of the finest LED lighting products on the market.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

When going off-roading, you can never have too much visibility, and as you can see with our 2016 Jeep Wrangler, we've added a ton of LED upgrades to improve visibility on and off the road, but today we're going to give it some style by installing an Oracle LED Halo headlight kit.

This kit comes with two super-bright LED halos to fit on the front of your headlights that have multi- color and effects to give your Jeep a nice custom look. It comes with a controller and a remote to give you easy control over the effects and colors, and today we're going to install it on our 2016 Jeep Wrangler.

First thing we're going to do is remove the grill by removing these six clips that hold it on. Pull on the grill to remove it. Stick the halo on the retaining ring, and press and hold for 30 seconds to make sure it stays in place. Run the wiring from the halo into the engine bay. Once you get the wire into the engine bay, repeat the process for the other halo. Once you have both halos in, reinstall the grill.

Plug in the Oracle module into the LED halo, and then hide the wiring. Split apart these wires just to give you a little bit more room to work with. It'll make it easier to wire up. Grab your Oracle LED controller and plug in the wires from the halos into it. The red wire will go into the R slot, green wire in the G slot, B wire in the B slot, but then the black wire goes in this DC+, over here is the positive and ground wire. Now we can hook up the power and ground wire.

We can now hook up the power and ground wire, you can wire this up any way you'd like, but we're going to wire ours into our trail rocker system. With all the wires hooked up, we can now hook up the remote sensor to it. If you want to use a remote, this kit does come with a remote and a receiver, so we're going to mount the receiver for the remote right here on the dash, and run the wire up the kick panel, through the grommet in the firewall and then connect it to the controller.

Peel off the adhesive backing, stick it on to the dash, and then hold it there for about 30 seconds to make sure it sticks. Pull the wire up through the grommet in the firewall, and plug it into the controller. Clean up the wiring and find a good place to mount this, and then your installation is finished.

Our Oracle Halo headlights are installed, we paired them with the fog light halo kit which is also available here at CJ Pony Parts. They complement each other really well, they look really good. Installation will take you about an hour and a half, and before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account