Patriot Exhaust Mid-Length Headers 1-5/8" Bare Steel Mustang 289/302 1965-1973
Highlights
- 1-5/8" Primary Tube Diameter
- Mid Length Shorty Style
- Natural Finish
- One Piece 3/8" Thick Flange
Patriot Exhaust Bare Steel Mid-Length 1-5/8" Headers for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289 or 302 Engine.
Clippster headers from Patriot feature longer 1-5/8" primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. The Patriot mid-lengths use 5/16" flanges with 1-5/8" primaries and 3" collectors. They are 16 gauge.
These headers are designed to work with a clutch cable conversion kit. Will not work with the original mechanical clutch linkage.
Will work on 1965-1973 Mustangs, however it is recommended to use the 1966-1/2 - 1970 style motor mounts. They sit 1" higher than the 1965 - early 1966 mounts.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Exhaust, Mustang Headers, Mustang Mid-Length Headers, Restomod Exhaust
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
