Pony Emblem Front Grille Gloss Black V6/EcoBoost/GT 2015-2020
CJ's Part Number:
Pony Emblem Front Grille Gloss Black V6/EcoBoost/GT 2015-2019 is rated out of 5 by 19.
- Ford Official Licensed Product
- Gloss Black Finish
- 3M Adhesive Backing
- ABS Plastic Construction
Gloss Black Front Grille Pony Emblem for 2015, 2016, 2017, 2018, 2019 and 2020 V6, EcoBoost and GT Mustangs.
Rated 4 out of 5 by Streiff from Great look but not the best design of back Gave the grille a nice look but the guiding pins were slightly too big so I needed to rinse the holes in the grille with a drill bit just slightly - no big deal but sign of poor quality. Also, the back of the horse is hollow, making the double sided tape only stick along the edges, no matter how hard you push it in place. The tape also bulged inwards making it impossible to stick just by putting it in position. The tail is slightly loose due to this and I'm not sure how long it will stick and survive washes. Impossible to reach down to fit the clips on the back to secure it too but that is not the pony's fault, although it would be unnecessary if the 3M tape was guaranteed to stick.
Date published: 2019-04-10
Rated 5 out of 5 by JMC813 from Looks great, but read reviews for install tips! First, I'll start off saying the end product looks great. Quality is OEM and I'm very happy with the look. That being said, I wish I had read the reviews for the install rather than going by the video only. CJ Pony always makes it look so easy! It gets difficult when trying to put the retainers back on the black emblem. They don't quite fit, and they're like little razor blades so your fingers aren't going to feel too good after it's all said and done. I recommend getting an allen wrench slightly larger than the hole and push through, making it a bit bigger. Then, with the horse off, press on to make sure the fitment is still snug and then carefully remove. I was able to get 3/4 of the retainers back on. The one for the head went MIA, but even still, the pony is nice and snug.
Date published: 2016-07-25
Rated 5 out of 5 by jeremyfd from Great product, tricky to fit on RHD I watched the video several times and when I popped off the radiator cover found an extra pice of hardware covering my hood latch on my UK-spec RHD 2017 convertible. It is a hood latch protector. Managed to get it off and followed instructions, only that accessing the pins on the emblem was tricky even with the hood latch removed. Only managed to get two fixings back onto black emblem, maybe my hands are too big!
Date published: 2017-06-23
Rated 5 out of 5 by SWB1965 from Great, simple addition The first thing I did with my first Mustang--a 1965 purchased new over 50 years ago--was to remove the Pony emblem from the front grille to simplify the design. When I purchased my current Mustang, removing the emblem was not an option, and replacing the grille was expensive. Replacing the silver Pony with this gloss black one made the difference I was looking for: a simplified front view without breaking the bank.
Date published: 2018-12-05
Rated 5 out of 5 by Clavijo8 from Gloss Mustang emblem I bought it because it was OEM and the emblem has a black adhesive. It looks great and it gives the appearance and look that I was looking fot. Great product easy to install.
Date published: 2018-12-02
Rated 5 out of 5 by ecobian217 from Great upgrade! I bought this emblem and when it came it exceeded my expectations. Not only it looks factory ,but the fit and detail are perfect. Also, the process to install it is very simple. My car is fully blackout, so this detail was just what the doctor ordered. Looking sweet!!
Date published: 2016-05-17
Rated 5 out of 5 by MrMustang55 from Perfect fit and finish Needed to do a chrome emblem delete on my new 2019 GT W/ PP1 package. Ordered the front grill pony emblem in gloss black really helped make the frontend look more agressive.
Date published: 2019-07-29
Rated 4 out of 5 by Dan C from Looks great Looks great, just like factory. Pins on the back don’t line up with a 18+ grill though. I just cut off the ones that didn’t. Had 3m on it also, so not a big deal.
Date published: 2018-10-22
Does the grill have to be removed to install the replacement horse emblem?
No it does not.
Date published: 2019-07-08
Will this fit 2014 V6?
No it will not.
Date published: 2019-01-11
Is the front grille emblem the same size and fit as the one on the rear deck lid?
No it is not.
Date published: 2018-10-05
Just bought a 2018 GT, will the blacked out pony and GT (rear) replacements fit?
Yes they will.
Date published: 2018-05-30
Can this be shipped overnight, today?
Add the item to your shopping cart and then proceed to checkout. In checkout, fill out your address info and scroll down to see all of the available shipping options and costs to your area.
Date published: 2018-03-05
would these fit a 2012 GT?
No they will not.
Date published: 2018-02-22
Will this fit the 2014 mustang gt? Thanks.
Date published: 2016-11-28
Will this fit a 2006 gt?
No it will not.
Date published: 2016-10-12
Complete Your Package