Power Antenna Kit Chrome 1965-1973

CJ's Part Number:
ANT15
Power Antenna Kit Chrome 1965-1973 is rated 4.3 out of 5 by 7.
  • y_2020, m_2, d_25, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_ANT15, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 100.66ms
  • REVIEWS, PRODUCT

Highlights

  • Chrome Finish
  • Power Antenna
  • Easy Installation
  • Complete Kit
MSRP $67.99
$48.27
You save 29%

Chrome Power Antenna Kit for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

This complete kit allows you to easily install a modern-style power antenna into your classic Mustang. This upgraded antenna has a beautiful chrome-plated finish that will accent and coordinate with your vintage beauty's other exterior chrome pieces. The fully-functioning antenna will provide your Mustang with endless radio station choices and will help bring your pony into the modern era. Order yours today from CJ's!

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this upgraded Chrome Power Antenna Kit for your classic 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang today from CJ Pony Parts!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 4 out of 5 by from Better than I thought. I installed this on my '70 Mach 1 after repaint. 4 stars because the power, ground and activation wire could have been longer. Also, the adapter pieces are flimsy and there are no drawings. This is a 'universal' style antenna with several adapters included. The antenna installed into my stock fender hole using a combination of included parts, original parts and small piece of aluminum I drilled a hole in. The look is pretty nice and it just cleared the passenger door after it was secured down.
Date published: 2015-06-24
Rated 5 out of 5 by from great aftermarket antenna for my 68 mustang I purchased this because I hated my stock antenna that was way too long. I was going to get the bullet antenna from scott drake but I wanted something like this where I would not have to worry about ripping another car cover. just a warning, you do have to remove the fender to install this. it took some time but It was well worth it. the length fully extended is about the same as the stock one. you do not need to keep the old antenna adapter that comes from the stock one, this kit comes with everything you need.
Date published: 2016-06-12
Rated 4 out of 5 by from surprisingly nice. Bought this after my car cover ripped my "concourse collapsible" antenna off the car in a particularly awful storm. I pulled it out to verify that it would mount in the stock location without modification to the area and see how I was going to mount it. It turns out that in a half hour I had installed it with no parts but what are included, reusing the mount plate and trim from the factory repro antenna. It fits perfectly in the fender space and clears the door, which is surprising to me because there was a lot less room in there than I remembered. . You will need to wire the antenna to a power source to make it work (ground, batterey hot, switched hot- some aftermarket radios give you a wire for this) and don't toss the old antenna until you get all the parts from it to reuse. You won't win any shows with this obvious aftermarket antenna, but you won't have to punch holes in your car covers or worry when you go to the car wash. 4 out of 5 stars because there's mo print instructions, just diagrams on the box and a few nice pictures.
Date published: 2015-03-02
Rated 4 out of 5 by from rectangle base had to modify the old rectangle base so to make it work .......gutted the base and had to drill out the opening to fit the antenna once I did that I cut the inside down slid the new antenna into the old base and it worked great nice and secure and flush with the base of the plate looks great works great !!!
Date published: 2016-10-31
Rated 4 out of 5 by from Great product All installed and working well. Very little info on installation instructions but not too difficult to suss out
Date published: 2015-12-13
Rated 4 out of 5 by from flat plate needed a little more install instruction due to the flat plate style on a base model 1970....
Date published: 2016-10-23
Rated 5 out of 5 by from Works Great I had this installed on my 1968 Mustang so I could put on my cover without poking a hole in it. I had to use some parts from the original antenna, but that was really not a problem. This antenna looks nice and works as it should......<><
Date published: 2015-09-25
  • y_2020, m_2, d_25, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_ANT15, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.15ms
  • REVIEWS, PRODUCT

I have a broken power antenna (that I would like to replace) in the stock front right fender of a '68 convertible. Can you tell me how to get the motor/power unit in and out of the fender. I don't see the access point.

Asked by: HPATTERN
You would have to remove the wheel and the splash shield.
Answered by: rk cjpp
Date published: 2019-10-14

I have a 1969 Mustang with the rectangular base. Do I need to purchase anything else to make it fit the square base? Can I use it if I don't have a power antenna connector as part of the radio?

Asked by: Cobra Jet
You shouldn't need anything else. You can use it without a power antenna wire, you will have to hook it up to a switch or switched power.
Answered by: rk cjpp
Date published: 2019-10-07

does this kit include the antenna or just the motor?

Asked by: Chasselarry
The antenna is built in.
Answered by: rk cjpp
Date published: 2019-06-18

I have a 69 Mach 1 with an original power antenna that's mounted on the passenger side rear quarter panel, is the cable long enough to reach the radio? and if not, can you please give me the part number for the extension that I would need to do so?

Asked by: Tracy69
The cable wouldn't be long enough to reach from the back of the vehicle. We do not offer a cable that would be long enough.
Answered by: rk cjpp
Date published: 2019-03-31

could I install this antenna on the rear quarter panel on a 1966 coupe?

Asked by: sticky
Yes, installing this in the rear quarter panel may be possible. Since this is a &quot;universal&quot; type antenna, it can be mounted in many different places.
Answered by: jmg1
Date published: 2018-11-28

H,i Does this antenna kit come with the chrome bullet base?

Asked by: MB65
The base is not included.
Answered by: rk cjpp
Date published: 2019-03-23

Does this have a wire to connect to the stereo so it will go up and down when the radio is turned on/off

Asked by: Red 65
Yes it does.
Answered by: rk cjpp
Date published: 2019-03-23

I have a 69 coupe ... have a hole in fender but I have no trim pieces... I don&rsquo;t see trim pieces in the picture...is there something else that I would need

Asked by: SuperDavewon
This does come with some mounting hardware. You may need to purchase an antenna kit, if you do not have any of the mounting hardware, to get additional mounts if needed.
Answered by: rk cjpp
Date published: 2018-05-01
  • y_2020, m_2, d_25, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_ANT15, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 143.57ms
  • QUESTIONS, PRODUCT