Premium Battery Apron Passenger Side 1965-1966

CJ's Part Number: XM116
CJ's Low Price:
1508544000 40831
Earn 34 RPM Points What's this?
Premium Battery Apron Passenger Side 1965-1966

Product Description

Premium Passenger Side Battery Apron for all 1965-1966 Mustangs.

When was the last time you looked at the battery apron on your 1965-1966 Mustang? Over the years, this part can get rusty and damaged due to exposure to water and battery acid. So make sure you replace your old one with this new Premium Passenger Side Battery Apron!

This Premium Passenger Side Battery Apron is a heavier gauge North American-made battery apron that attaches the front of your Mustang's shock tower cover to its radiator support, and then the battery tray attaches to this apron. It'll easily spot-weld right into place and even comes with holes pre-drilled for your fender mounting bolts!

CJ Pony Parts is positive that you'll want your Mustang looking its best, so we offer a variety of body and sheet metal parts. CJ's body and sheet metal will allow you to repair damaged parts of your Mustang or style your Mustang to have the perfect look to impress anyone who sees it.

Order a Premium Passenger Side Battery Apron for your 1965-1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Fender Aprons  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Premium Battery Apron Passenger Side 1965-1966 is rated 3.2 out of 5 by 5.
Rated 1 out of 5 by from Poor quality Not much premium about this part. It doesn't have the correct contour to match the fender, this part is completely flat, but the fender has a slight curve. Pretty obvious when you go to mount the fender. Had to cut the top off the old apron and graph it to this one to fix. The flanges that meet up with the radiator support are also pretty bad, barely big enough for welding and not even square, had to add metal in the corner so the radiator support didn't have to be sucked in to meet the apron. This part has lots of room for improvement.
Date published: 2017-06-14
Rated 3 out of 5 by from Average quality The fit was fine but the quality of the stamping was very poor. I bought this one because I bought a cheap one and the metal was too thin and flimsy. The stamping of the "premium" one better but looked like it slipped in the press and is heavily gouged. Debating which one to use (or buy a third one)
Date published: 2016-02-16
Rated 2 out of 5 by from poorly formed and poorly trimed For a part advertised as "premium", very disapointed in the sheetmetal. Poorly bent , (underbent), along the top, poorly trimed (looked plasma cut with the scarf remaining), poorly bent along the front edge. If I had the time, I'd return it.
Date published: 2016-11-20
Rated 5 out of 5 by from Stronger than expected This apron was made out of thicker steel than I expected. The edges were a little big which was good s I could cut it to fit my car. Also I liked the defined stamp markings where the fender bolts go it just shows the quality of the stamping.
Date published: 2015-02-19
Rated 5 out of 5 by from Nice piece. Good quality. fast shipping. Had to trim the bottom and tower side about a half biggie.
Date published: 2015-10-13
  • y_2017, m_10, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_XM116, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 141.89ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 135.16ms
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like