PRO-M Mass Air Meter WAVE Mustang 5.0L 2015-2018

Directly replace your 2015-2018 Mustang's original sensor with the PRO-M WAVE Mass Air Meter (WAVESENSOR). Unlike your original, the PRO-M WAVE Mass Air meter has 2.5 times more range! The extended range is compatible with up to 800 flywheel horsepower without upgrading the air cleaner box. 

Features and Benefits:
- Supports up to 800 Horsepower w/ 3” Diameter Tube
- Can be used with Stock Air Cleaner Box
- Excellent Resolution for Superior Tuning Capability
- Proudly Manufactured in the USA!
- 2.5 Times more Range than Stock
- Extended Range for Different Horsepower Rating

The PRO-M WAVE can also be used as an addition to fabricated ducting. Due to its design, this sensor can easily be added to any piece of existing ducting. It can be used in both blow-through and draw-through applications. The PRO-M WAVE is calibrated so that its range just slightly exceeds that of the ducting in which it is installed. This means that the sensor cannot peg, yet still has excellent resolution. The transfer function sheet shows the transfer function that the PRO-M WAVE will have in whatever diameter duct you've chosen. It will support up to 800hp in a 3in diameter tube, up to 1100hp in a 3.5in diameter tube, and up to 1500hp in a 4in diameter tube.

*Tuning is required, and a 40 point transfer function sheet is included.

Wire Diagram:
- Pin 1(F) = Not Used
- Pin 2(E) = Intake Air Temperature (IAT)
- Pin 3(D) = 12V Power
- Pin 4(C) = Ground
- Pin 5(B) = Mass Air Signal
- Pin 6(A) = Not Used

Please Note: WAVE sensors require the customer to enter the transfer function sheet (included) data into the ECM.