Projector Headlights With Daytime Running Light Bar Black With Factory Halogen Headlights Pair F-150 2015-2017

CJ's Part Number:
65% of 100


  • Built In Drls
  • Provides Better Visibility
  • Direct Fit Upgrade
  • For Halogen Model Trucks
MSRP $599.99
You save 25%

Pair of Black Projector Headlights with a Daytime Running Light Bar for 2015, 2016 and 2017 F-150s with Factory Halogen Headlights.

Designed with your 2015-2017 F-150 in mind, this Pair of Black Projector Headlights comes with a Daytime Running Light Bar for better daytime visibility and a stealthier look. And it's now easy to get your hands on a pair thanks to CJ Pony Parts!

Features & Benefits:
- Designed for 2015-2017 F-150s with Factory Halogen Headlights
- Gives Your F-150 a More Stealthy Look and Allows for Better Daytime Visibility
- Comes with Ultra-Bright Built-In Daytime Running Lights (DRLs)
- Black Housing
- Direct Fit Upgrade
- Sold as a Pair: Driver Side and Passenger Side
- Low and High Beam Halogen Bulbs Included
- Low Beam Bulb Type: H7 12V 55W
- High Beam Bulb Type: H1 12V 55W
- Comes with the Correct Harness and Adapters

Please Note: These Projector Headlights will need to wires spliced into a power source linked to the ignition so the daytime running lights will turn on whenever the vehicle is turned on.

This Pair of Black Projector Headlights with a Daytime Running Light Bar is meant to be used on 2015-2017 F-150s with factory halogen headlights. These headlights also include ultra-bright built-in daytime running lights, and they're all enclosed in a nice-looking black housing. They're direct fit upgrades that will give your F-150 the look you want while also improving your safety as you're driving down the road because they glow brighter than your factory headlights. You'll get two headlights total with your order, one for the driver side and one for the passenger side, with low and high beams. You'll also get everything you need for an easy installation, including the correct harness and adapters. You'll have these new headlights installed in no time, and you'll love the way they look on your F-150!

*These custom headlights are not compatible with F-150s that came with factory LED and/or DRL headlights and F-150 Raptors.

While Ford has revolutionized the F-150 in recent years, aftermarket parts continue to be hugely popular as owners strive to put their own personal touches on their trucks. At CJ Pony Parts, it's easy to find whatever aftermarket Ford F-150 parts you're looking for!

Order a Pair of Black Projector Headlights with a Daytime Running Light Bar for your 2015, 2016 or 2017 F-150 with Factory Halogen Headlights from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

If you've been following our YouTube channel, you've seen we've already installed LED headlight bulbs and PUTCO DayLiner switchbacks in our 2016 F-150, and it does look pretty awesome as it is, but I still think there's room for improvement, so today we're going to completely change the look of our F-150 by installing a set of these black housing projector headlights. These headlights are going to be direct fit replacement for the factory headlights and they have built in LED turn signals, maker lights and parking lots. They also have black housings and LED daytime running lights for an absolutely killer look, and projector low beams for better visibility. Overall, they're going to improve the look, safety and visibility so today we're going to install them on our 2016 F-150.

The tools you'll need for this installation: 1/4 inch ratchet, 7 millimeter socket, 8 millimeter socket, 10 millimeter socket and extension, panel removal tool or flathead screwdriver and a set of pliers.

The first thing we're going to do is remove the 2 screws right here holding on the headlight trim. If you have fender flares like we do, you might need to remove these. Use a 7 millimeter socket to remove these 2 screws. Remove this top clip on the headlight trim. You can use a panel removal tool or a flathead screwdriver. Then you're going to pull on the corners of the headlight trim to pop it out of the clips and you're going to meet in the middle and then completely pull it off. Now you may notice, we do have an aftermarket bumper, so we're missing a lot of the trim pieces that attach to this panel right here, so not all the bolts and screws are here but once you get to this step, just remove all the bolts and screws that hold it on, then you can remove it. All the bolts holding this on are 10 millimeter but then the very last one right here is an 8.

Remove the 2, 10 millimeter bolts on top of the headlight. Then there's one more 10 millimeter bolt deep in here. Lift up on this tab right here that seems to be broken off of our headlight, then you can just pull it right off. Disconnect all of the connectors. This kit comes with its own wiring harness for the LED daytime running lights. It comes with 2 terminated ends and 1 stripped end. Now you're going to grab the stripped orange wire from the kit and you're going to splice it into this little wire on the brown connector, right here. This will activate your daytime running lights. Use some pliers and give it a good squeeze. One of these terminated wires plugs into the headlight right here, then you run the other wire over to the other headlight. Now, we're just going to run this wire over to the other side.

Remove these 2 bulbs to use the connectors on the new headlights. This bulb and this one. Remove the bulb from each connector. Now you're ready to connect this headlight to the harness on the truck. At this point, you can connect the headlight to the harness and re-install it. However, this headlight comes with halogen headlights, and since we already have the LED bulbs in the truck, we figure we might as well keep LED bulbs in these housings, so we're going to put some PUTCO LED bulbs in here. If you want to switch the bulbs out, this is how you do it. Install the new PUTCO LED bulb. We have these available on our website if you would like to purchase these. Plug in all the connectors to the headlight then you can re-install it. The wire that you spliced into the marker lights, this is where you plug it into. The green wire on the headlight. Once you get everything connected, you can put the headlight in place.

Once you get everything put back together and you've done your testing, if you find out that you can't get your daytime running lights to work with the turn signals, if you can only get one to work and not the other, not both at the same time, I'm going to show you what the problem might be and how you can possibly fix it. If you're running into this problem, the solution is pretty simple. Unplug this connector and the power wire, the red on right here, sometimes this pin will be on the wrong side, so what you might have to do is simply just fold this back over and then plug it in and it should work, or you might also have to rotate it, but either one of these will probably fix your problem.

We're going to install the 2 bolts up top. Then, before you install the rest, test to make sure everything is working properly, just so you don't have to tear it all apart if something's not plugged in right. All right, let's test it and see if it works. Put the key in the ignition and turn it on and looks like it's working. We're going to install the third bolt, be careful not to drop it. Re-install this headlight panel. We'll re-install all the bolts. Then, re-install this headlight panel. Re-install the clip up top, then the screws on the side. Once you get all the screws in place, you can repeat the process on the other side, then you're installation's finished.

Here's a side by side comparison of our new, black projector headlight versus our old, factory headlight with LEDs in it. It's important to note the factory headlight does have all LEDs in it, so it does look better than just straight from the factor but the projector headlight just takes it to a whole nother level. Our black projector headlights are installed. I absolutely love the way they look. They really changed the whole look and gave it a real aggressive look. Installation's not that bad, it should take about an hour and a half, maybe two hours, and before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.