PUTCO SwitchBlade LED Tailgate Light Bar 60" Chevrolet Silverado/GMC Sierra 2007-2017

PUTCO: 92009-60
MSRP: $260.99
CJ's Low Price:
$207.99
1508630400 66621
Earn 207 RPM Points What's this?
PUTCO SwitchBlade LED Tailgate Light Bar 60" Chevrolet Silverado/GMC Sierra 2007-2017
PUTCO SwitchBlade LED Tailgate Light Bar 60" Chevrolet Silverado/GMC Sierra 2007-2017 Play PUTCO SwitchBlade LED Tailgate Light Bar 60" Chevrolet Silverado/GMC Sierra 2007-2017 Video 1 Play PUTCO SwitchBlade LED Tailgate Light Bar 60" Chevrolet Silverado/GMC Sierra 2007-2017 Video 2
PUTCO

Product Description

PUTCO 60" Switchblade LED Tailgate Light Bar for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017 Chevrolet Silverados and GMC Sierras.

If you want to start making some upgrades to your 2007-2017 Chevrolet Silverado or GMC Sierra, why not start with something that's most visible to you and other drivers on the road? Order this 60" Switchblade LED Tailgate Light Bar 92009-60 by PUTCO today from CJ Pony Parts and make your truck be seen!

This 60" tailgate light bar has upgrade COB LEDs and that coveted switchblade functionality you're looking for in lighting upgrades! The bar will easily install and requires little to no electrical knowledge. Your Silverado will be more visible at night when you're driving down the highway or a dark back road, so you'll feel safer but look even better than before. Order your upgraded LED light bar today from CJ's!

PUTCO 60" Light Bar Features and Benefits:
- High-Power COB LEDs
- LED Output Light in Red, Amber and White
- Fully Encased in a Tinted Polycarbonate Housing
- Custom-Designed to Fit All Full-Size Chevrolet Silverados and GMC Sierras
- IP69K: Fully Sealed for Waterproofing and Weatherproofing
- Operates with Running Lights, Brake Lights, Reverse Lights and Turn Signals
- Includes 4-Prong Wiring Harness to Easily Hook Up to Receiver Hitch and Attachment Clips for Easy Access to Your Spare Tire

This PUTCO 60" Switchblade LED Tailgate Light Bar has high-power COB LEDs that emit red, amber and white light. Fully encased in a tinted polycarbonate housing, this light bar is IP69K-rated. This means it's fully water- and dust-proof, so you won't have to worry about long-term exposure to outdoor elements like the sun, wind, dirt and rain! It's custom-designed to fit all full-size trucks too. When you order this light bar, you'll get a 4-prong wiring harness to easily hook up to your receiver hitch. And the included attachment clips will allow you easy access to your spare tire when you need it!

Order this new PUTCO 60" Switchblade LED Tailgate Light Bar 92009-60 for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 or 2017 Chevrolet Silverado or your GMC Sierra from CJ Pony Parts today!

Similar Silverado Parts

similar Silverado parts More Light Bars  

Silverado Applications

This product will fit the following Silverado years:

  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 171.91ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 131.21ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like

Product Video

PUTCO SwitchBlade LED Tailgate Light Bar 60" Chevrolet Silverado/GMC Sierra 2007-2017 Video Transcript
By Bill Tumas: Everyone wants their truck to look awesome, so today we're going to make our 2017 Silverado stand out, and make it a little bit safer by installing this PUTCO SwitchBlade Tailgate LED Light Bar fitting your 2007-2017 Silverado and Sierra. This tailgate light bar features super bright COB LEDs protected by a polycarbonate housing to give your Silverado a custom look. It's simply installs under the tailgate to work with the running lights, brake lights, reverse lights, and turn signals to give your truck a custom look. Today we're going to install it on our 2017 Silverado.

Okay so we're at the back of the truck, and this is where the light bar is going to go. Now you don't need to remove the tailgate for this. We took it off just for filming purposes, but it does make it a little easier. At the same time, you don't need to remove it to install this. We're going to get it nice and centered, and then wipe down the area with some alcohol to make sure it's nice and clean. As you can see there's a lot of dirt back here, so this is why we are wiping it down. There's a couple different ways you can mount this light bar. You could take these 3M sticky pads and put them directly onto the light bar, and then mount the light bar to the bed, or if you wanted to go a step further, you could drill holes and mount these brackets with screws. We're not going to do that. Today we're going to be attaching these 3M strips to the brackets, and then the brackets to the light bar.

Peel the backing off the tape. Now stick it to each bracket. You're going to put the light bar on the bed here, and get it nice and centered. I'm lining up a crease in the middle of this light bar where the two strips meet up with the center of this hole. That's got it pretty centered. Now we can see where the brackets are going to attach. We're going to take this adhesion promoter and wipe down all four areas. We're going to start off by peeling the middle brackets. Now you can do the ones on the end.

Okay we have the light secure, now it's time to wire it up, which is pretty simple. It comes with this four prong connector, which plugs right into the trailer harness. This will work with the brake lights, running lights, and turn signals. To do the reverse lights, all you need to do is use one of the provided wire taps, and tap into your reverse light signal. I'm going to run these wires down here in between the bed and the bumper. Pull them down. We have the four prong connector coming down from behind the bumper. Now we're going to feed it up through the license plate hold. This makes for a super easy connection, just plug it right into the trailer harness. Now I can wire up the reverse lights.

To access the reverse lights we're going to tap the middle pin on the seven connector trailer plug. There's two tabs on the back of this, so you have to squeeze and then it will pull forward. It reveals the harness. The wire we're going to be tapping into for the reverse lights is this white wire with a green stripe that goes through the very center of this connector. Grab the supplied wiretap and slide it over the wire. Then shove your white wire that goes to the LED bar into the other hole of the wiretap. Make sure they're both in there, grab a pair of pliers, and press down on the middle tab. There you go, the wires are tapped. Now we can test and make sure the light bar works.

All right, looks like it’s working pretty good. Okay the light is working pretty good, and we can now reinstall everything and tidy up the wiring. Okay our PUTCO SwitchBlade LED Light Bar is installed. It looks absolutely killer on the back of this truck. Installation is super easy. It should only take you about an hour or less. Before you know it, you'll be heading off road.