QA1 Drag Racing Suspension Kit Level 2 Without Shocks 5.0L 1994-1995

QA1:
DK32-FMM3

Highlights

  • For Drag Racing Applications
  • Bolt-On Installation
  • Black Powder Coated Finish
  • Proudly Made in the USA!
MSRP $1,734.37
$1,546.99
You save 11%

QA1 Level 2 Drag Racing Suspension Kit Without Shocks for 1994 and 1995 Mustangs With a 5.0 Liter Engine.

If you have been thinking about enhancing the racing performance in your quick Mustang, your search is over! Experience extraordinary grip of your racecar's ride through fortified traction and handling with this QA1 Level 2 Drag Racing Suspension Kit Without Shocks (DK32-FMM3) For your 1996-2004 Mustang With a 4.6 Liter Engine. QA1 Tubular K-Member is made from HSLA steel, which is a high strength, low alloy steel. This K-member comes in a sleek black powder-coated, high gloss finish. This K-member is 50 percent lighter than the factory K-member and is made in the USA. QA1 designed the lower control arm brackets to be raised, which corrects roll center when your Mustang is lowered. This K-member also maintains optimum anti-dive geometry with minimized bump steer issues. Ideal for Street Performance and Drag Racing applications, this K-member gives you the ability to change the steering geometry with stainless steel steering rack relocation inserts. You can choose to run the steering rack in the stock location, or raise the rack for maximum performance.

Features and Benefits:
- For Drag Racing Applications
- Bolt-On Installation
- Black Powder Coated Finish
- Anodized Red Finish (Rear Upper Control Arms)
- Includes all Necessary Mounting Hardware
- Proudly Made in the USA!

The Front Lower Controls are constructed from high-quality steel that are fully welded for a high-quality finish. The X-Series Chromoly Rod Ends will give you a wide range of wheel alignment and the Low Friction Ball Joints reduce friction in the Front Suspension. The Front Lower Control Arms will reduce unsprung weight while improving weight distribution in race applications. The QA1 Race Style Front Lower Control Arms are 15lbs. lighter than the Factory Front Lower Control Arms. QA1 welds mounting brackets for the Front Sway Bar in case the customer would like to install one later down the road. The Rear Upper Control Arms are constructed from 1-1/4” diameter Aircraft Aluminum. On the body side of the Rear Upper Control Arms have spherical rod ends, this allows the customer to finely tune the pinion angle on their Mustang while still on the vehicle. The Spherical Rod Ends include grease fittings for easy routine maintenance. QA1 includes a pair of Rear-End Bushings that install in the rear end housing. The Rear End Bushings are constructed from polyurethane and will eliminate bushing bind, allowing the suspension to move smoother for better vehicle control. Once the Rear Upper Control Arms are constructed they are then Finish in a Bright Red Anodized Finish. All the necessary mounting hardware is included for installation.

Kit Includes:
Tubular K-Member
5.0L Motor Mounts
Pair of Race Front Lower Control Arms
Bump Steer Kit
Rear Sway Bar
Pair of Boxed Rear Lower Control Arms
Pair of Adjustable Rear Upper Control Arms
All Necessary Mounting Hardware

Vehicle Fitment:
- 1994-1995 Mustangs with a 5.0 Liter Engine

The QA1 Bumper Steer Kit will fix unwanted toe change when you hit a bump in the Road or at the Track. This Bump Steer Kit includes self-lubricating X-Series Rod Ends and Aluminum Adjusting Sleeves. QA1 includes an assortment of Bump Steer Spacers so that the inner tie rods run level and parallel with the Steering Rack and Pinion. The Bump Steer Kit will replace the factory outer tie rod ends and replace them with high-quality components.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.