QA1 Driveshaft Carbon Fiber REV Series One-Piece SFI Approved GT 2005-2010
QA1 SFI Approved REV Series One-Piece Carbon Fiber Driveshaft for 2005, 2006, 2007, 2008, 2009 and 2010 GT Mustangs.
Get high speed capability and built-in strength for your 2005-2010 GT Mustang while still being lighter than other driveshafts with this QA1 (JJ-21209) REV Series One-Piece Carbon Fiber Driveshaft. They feature a Mustang-specific flange yoke front attachment and a high speed CV joint on the rear with a high speed sealing boot and high temp grease. This high speed capability, combined with the tube's uniform wall thickness from being wound in-house, improves performance by minimizing the effects of noise, vibration and harshness (NVH) that are common in the factory two-piece driveshafts.
The strength and weight savings mean extended transmission and differential life, quicker acceleration and more power to the ground. The QA1-exclusive 3M Matrix Resin is designed specifically for driveshafts in a racing environment and ensures ultimate torque capacity under the most extreme conditions. Our proprietary 11-step bonding procedure utilizes a high-strength structural adhesive and ensures a better balance and increased assembly strength. By controlling the torsional stiffness of our driveshaft in-house, we are able to achieve more twist and smooth out torque spikes, resulting in increased traction during launch and shift points. In the unlikely event of a failure, a carbon fiber driveshaft splinters, so racers don't have to worry about it coming up through the floor board and seriously hurting them or their car. QA1's drifeshafts that use solid U-joints have been subjected to various tests to meet SFI's 43.1 specifications for safety and performance, proving their extreme strength and durability. Don't wait and order yours now from CJ's!
Features and Benefits:
- Rated for up to 1500 HP / 1000 lb*ft
- 3.3" Outside Diameter Tube
- 3M Matrix Resin for ultimate torque capacity
- Lighter, stronger and safer than steel or aluminum
- Harmonic tested to ensure it meets NVH requirements
- Torsion tested and serialized
- Up to 50% weight savings over stock driveshafts
- Smooths out RPM spikes during launch and shift points
- Wear Resistant & Durable
- Increased Strength & Weight Savings
- Improved Torque Capacity & Longevity
- High-Strength Assembly
- Increased Traction
- Dramatic Safety Benefits
- Made in the USA
- Easy, bolt-on installation
- Certified to the SFI 43.1 Specifications
*Fits Automatic and Manual Transmission equipped 2005-2010 GT Mustangs.
Please Note: Does not fit 2005-2010 V6 or 2007-2010 Shelby GT500 Mustangs.
Order this QA1 JJ-21209 REV Series One-Piece Carbon Fiber Driveshaft for your 2005, 2006, 2007, 2008, 2009 or 2010 GT Mustang from CJ Pony Parts today.
California Residents: Proposition 65 Warning