Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017

Rally Armor: MF29-UR-BLK/OR
CJ's Low Price:
1508371200 60793
Earn 159 RPM Points What's this?
Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017
Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Play Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Video 1 Play Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Video 2
Rally Armor

Product Description

Rally Armor Black Mud Flaps with Orange Logos for all 2014, 2015, 2016 and 2017 Fiesta STs.

Take your ST to the next level with these new Rally Armor (MF29URBLK) Mud Flaps specifically designed for your 2014-2017 Fiesta ST! Available in a variety of colors in a set of four, these mud flaps give your ST that rally-inspired look that any and all enthusiasts are after!

We have worked very closely with Rally Armor to develop exclusive color combinations available ONLY at CJ Pony Parts! Both the Black with Orange Logo and Black with Green Logo versions are available exclusively through CJ’s. Designed to perfectly match the factory Molten Orange and Green Envy color, these Mud Flaps are the perfect tasteful touch for your Fiesta ST!

Rally Armor Mud Flap Features:
- Sold as a Set of Four
- Provides Superior Paint Protection
- Fills Voids Within Fender Wells
- Allows For Clean Contour Lines
- Material Remains Flexible in Hot and Cold Climates
- Super-strong, Impact Resistant Urethane Construction
- Includes Stainless Steel Mounting Brackets and Hardware
- Comes with Installation Instructions
- Made in the USA

Available Color Combinations:
- Black with Blue Rally Armor Logo
- Black with Gray Rally Armor Logo
- Black with Red Rally Armor Logo
- Black with Orange Rally Armor Logo (CJ Pony Parts Exclusive)
- Black with Green Rally Armor Logo (CJ Pony Parts Exclusive)
- Red with White Rally Armor Logo

These Rally Armor Mud Flaps are developed with a strong, impact resistant material that will protect the exterior of your Fiesta ST’s from anything the road throws at it. Made with urethane, these mud flaps maintain their shape and form, whether it’s in extreme heat or bitter cold temperatures. This rugged design allows each mud flap to maintain a balance between flexibility and long term durability. Picking up these mud flaps for your Fiesta ST doesn’t only add a rugged look, but it protects your paint too!

Each set of Rally Armor mud flaps includes four UR mud flaps, one for all four wheel wells of your Fiesta ST, mounting instructions, stainless steel brackets and hardware.

Order a set of Rally Armor Mud Flaps (MF29URBLK) for your 2014, 2015, 2016 or 2017 Fiesta ST from CJ Pony Parts today!


Installation Instructions

Mustang Installation

Fiesta Applications

This product will fit the following Fiesta years:

Product Reviews

Write a review
Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great RA product as always First mod I wanted to do to my new fiesta ST, and the quality is top notch as always. Having had rally armor on my wrx in the past, I knew that the quality would be great, and the choosy exclusive orange logo was a nice touch to compliment the molten orange on the car. My only gripe about the install was the tack-weld screws that were on the front brackets. They are very weak and I unfortunately managed to snap the stud on one of them. But a little ingenuity and help from a friend got it bolted back on and g2g!
Date published: 2016-05-31
Rated 5 out of 5 by from Best mud flap for the Fiesta ST The Fiesta was not designed to accommodate mud flaps. Rally Armor took the challenge and created a great fitment and solid product. The product is easy to install and works as advertised. Best of all CJ carries the exclusive orange and green logo variant. I recommend checking the screws a few weeks after install to verify they are still snug. Any loose ones I added some thread lock.
Date published: 2015-06-19
  • y_2017, m_10, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_MF29URBLKOR, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.81ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 108.94ms
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like

Product Video

Rally Armor Mud Flap Black With Orange Logo Set Fiesta ST 2014-2017 Video Transcript
By Bill Tumas: Rally Armor's mud flaps have been very popular with the Focus ST crowd. Now, they're available for a Fiesta ST as well. While some people install mud flaps strictly for looks, their main job is to protect the paint from flying debris coming off your tires. To be honest, if you're driving your ST like it's meant to be driven there's a good possibility that it's happening. Today, we're going to show you how to protect your paint by installing a set of Rally Armor Mud Flaps.

Rally Armor's mud flaps are made right here in the USA. They have a very heavy duty resilient urethane. What that means is hot and cold temperatures are not going to affect them, so they'll protect your paint for years to come. The kits going to include front and rear med flaps plus all necessary hardware for installation.

Rally Armor offers the Fiesta mud flaps in their standard black with red, black with grey, black with blue, or white with red finish. If you have a green Envy or a molten orange Fiesta, we've teamed up with Rally Armor to offer these exclusive black with orange or black with green which will look great on your Fiesta.

For this installation, you need a lift or a jack and jack stands, Phillips head screwdriver, panel removal tool, small pick, 1/4" ratchet, 7/16" socket, marker, drill, pilot drill bit, 1/4" drill bit, 5/16" drill bit, and safety glasses.

You want to start the installation by getting the Fiesta up in the air and removing all four wheels. You can start with the front or back. It doesn't matter. My opinion, the front's the more difficult installation. I'm going to do that first. The first step on the install here is to remove this rocker end cap by removing this mounting clip. With the cap off, clean the area behind it. You'll probably find lots of rocks and gravel and dirt in here, which is kind of why we're installing these mud flaps in the first place.

Then, we grab the thicker foam spacer, remove the adhesive back, and go right here on the end. Once you do that, you're going to carefully reinstall the liner. If you get it just right the liner's going to line up evenly with the actual edge of your fender and push up against it. With the liner reattached, we're going to remove the inner screw. We'll be installing a bracket here. These tend to strip easily. You may need a small pick to get this out.

Then, we're going to install the first bracket. You want to grab the bracket itself, then one of these clips, one of the shorter screws, and one of the plastic clips with the screw in the middle, which you're going to remove. You're going to remove the screw of the supplied plastic insert. Put that in the stock location back there. Then, we're going to grab the bracket with the metal screw, and thread it into the plastic insert. Remember, you're threading metal into plastic, so just get it snug. You don't have to over tighten. With that in place, now install the clip from the bottom. Just slide it up.

Now, we're going to grab the factory end cap, this mounting bracket here, and a small screw and washer. This is going to go behind the end cap. You're going to line that up, put that in the factory mounting point on the splash shield where we removed the clip earlier. Careful not to over tighten this, because you are screwing into the plastic. Just get it snug.

The next step is this end cap cover. It's going to cover up this aftermarket bracket. Basically what it's going to do is fit over this, go flush with the end cap, flush with the edge of the fender. It's actually going to following the molding of the splash shield. You want to hold that in place, and then mark these three holes. We're going to drill at the three marked holes to a 1/4". I suggest starting with a smaller bit as a pilot hole, and then open them up. With our holes drilled, I'm going to reinstall the plastic trim panel we just removed. Install the push pins.

Now, we're ready to install the actual mud flap. The first step here is to remove this screw that we temporarily install earlier. Now, we'll hang our mud flap. We're going to install this black bracket over it. The bracket here you may have to bend slightly. You want it to match the contour of the fender to make sure that it holds this in place. We have that where we want it. Install a washer and a nut on each of these, and just hand tighten them for now. We're going to reinstall the middle screw we just removed. Again, just get it started.

Finally, screw in the back bracket. Just line up the plastic clip until it goes with the mud flap. Also, just hand tightened. You want to leave it loose and have an adjustment, so you can adjust it and get it straight and flat. Then, tighten everything down. Give this just a little bit more bend and reinstall the hardware.

With the wheel off the car, the first step in installing the rear is to remove these two clips here, and then drill out the lower rivet. Now, with the rivet removed, drill out the 5/16". Now, peel back the liner and grab two of the S clips. We're going to slide these over their existing holes. Now, we're going to grab the supplied push pins here. Once again, we're going to separate it. Discard the center, and we're going to put this in the hole we just drilled. Now, you want to grab the long foam spacer. Make sure your bumper cover is as clean as possible right here. Install that with the bottom edge touching the bottom of the bumper cover and contoured upward.

Now, you want to grab the bracket for the rear mud flap. The brackets are not side specific, so grab either one. The flat end here we're going to put the round spacer on it. This end down here is going to get a clip. Now, you want to put the bracket behind the mud flap. Sort of just hold it up, get an idea of where everything is going to go, make sure you have the right side, logos facing the back. I'm going to put a large screw with a washer through the middle, put the taller spacer on the back, and we're going to carefully thread it in. Just a couple turns to hold it in place.

Now, you're going to grab another longer screw and a washer. This time we're going to use the short plastic spacer and put that up to here where the foam is. Then, line that up with the other clip. Just a couple turns to keep it in place. You want to keep everything loose for now. Grab two short screws and two more washers and thread them into the two additional holes left here. Again, just get them in there and snug for now, so we can adjust the mud flap before tightening everything down.

What you want to do is get the flap nice and straight, and then tighten everything down. Just get them snug. You're screwing into plastic, so you can strip them pretty easily if you make it too tight. You're going to repeat the process on the other side, and your installation's finished.