Rally Innovations Front Splitter 3-Piece Matte Black Aluminum Fiesta ST 2014-2019
- Aluminum Construction
- Direct Fit
- Matte Black Powder Coat
- Made In The USA
Rally Innovations Matte Black 3-Piece Aluminum Front Splitter for 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.
If you're looking to add some aggressive, modern styling to your 2014-2019 Fiesta ST, CJ Pony Parts has a wide array of exterior and interior accessories to fit every style, preference and function you need. Among this collection is Rally Innovations' 3 Piece Aluminum Front Splinter finished in a Matte Black Powder-Coat. Subtle enough to compliment any body color and style, this splitter will take your exterior appeal to another level.
Front Splitter (FO-P4G-FSP-01) Features:
- 11-Gauge Aluminum Construction
- Matte Black Powder Coat Finish
- Unique 3-Piece Design
- Track Tested
- Easy Bolt-On Installation
- All Necessary Hardware Included
- Detailed Installation Instructions Included
- Made in the USA
- For 2014-2019 Fiesta STs
This splitter is constructed from 11 gauge aluminum for reliable durability. The metal is finished in a matte black powder coat that not only looks great, but also protects your splitter from surface damaged caused by debris and the elements. The splitter (P/N: FO-P4G-FSP-01) has three pieces for each section of your front end to make a cohesive look. The styling is inspired by aggressive high-performance cars out on the track, and this splitter is track tested to withstand normal wear and tear over the years. Rally Innovations manufactures this front splitter in the United States.
Installing this splitter is simple. Its bolt on design allows it to easily slip onto your Fiesta. The splitter comes with all the necessary installation hardware and with detailed instructions for proper installation.
Please Note: This 3-Piece Front Splitter is not compatible with the Fifteen52 Front Cup Spoiler Kit (P/N: 00691).
Order this Rally Innovations Matte Black 3-Piece Aluminum Front Splitter for your 2014, 2015, 2016, 2017, 2018 or 2019 Fiesta ST from CJ Pony Parts today!
California Residents: Proposition 65 Warning
It features a three piece design that's been developed and tested for an easy install, and to make the front of your Fiesta look a look more aggressive. The installation of this front splitter is very straight forward, so let's get to it.
Tools you'll need for this installation: a lift, or a jack and jack stands, 1/4 inch ratchet, seven millimeter socket, 3/16 hex key, 3/8 drill bit, a drill, and safety glasses. Okay the first thing we're going to do for this installation is remove the five screws on the bottom of the front bumper. We're going to loosely install the center piece by using one of the factory screws.
Install the side pieces with the OEM hardware. Install the other side. Don't get these super tight just yet, leave them a little bit loose. And make sure that the center piece is resting on top of the side pieces. Then you're going to check your alignment of all three pieces. Grab a 3/8 drill bit and drill out the remaining holes in the center piece.
It's going to be a little bit difficult to get these nuts on, but it is possible. We can now install the provided hardware into the front splitter. We're going to be taping the nuts to this wrench to hold it in place. This will make it a lot easier. Just line it up with the hole. And install your bolt. And your installation is finished.
Okay, we got our Rally Innovations 3-piece front splitter installed on our Fiesta ST. Makes this thing look a lot more aggressive, and installation couldn't be any simpler. All you had to do was drill out three holes, and should only take you about 45 minutes. And before you know it, you'll be heading down the road.