Rancho Shock Absorber RS5000X Front/Rear Kit For 0-2" Lift Jeep Wrangler JK 2007-2018
Rancho Front and Rear RS5000X Shock Absorber Kit for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers with a 0-2" Lift.
Lifting your 2007-2018 Jeep JK Wrangler, even between 0-2” is one of the most popular modifications among Jeep owners. But you want to make sure that you have the proper shocks to get the most out of your lift. This Rancho Front and Rear RS5000X Shock Absorber Kit from CJ Pony Parts will get your shocks upgraded for extreme off-road performance and on-road comfort!
Rancho Front and Rear RS5000X Shock Absorber Kit Features and Benefits:
- Progressive Engagement Valving
- Tuned Compression Control Valve
- Enlarged 2-1/4” Twin Tube Body
- Gas Pressurization of Shock 150 PSI
- 16mm Nitro-Carburized Rod
- Full-Displaced 35mm Bore
- 1.375” Diameter Sintered Iron Piston
- Rebound Bumper
- Black Natural Rubber Bushings
- Low-Friction, Self-Lubricating Seal
- Protective Boot
- Glass-Filled, Fluon Banded Piston
- Double-Welded Loops
- Dust Boot Included
Rancho’s Front and Rear RS5000X Shock Absorber Kit utilizes progressive engagement valving that allows the fluid in the shock to flow earlier than usual to reduce the impact harshness when hitting obstacles or potholes. This valving also helps to minimize a harsh ride while driving on rough roads. Custom tuned clamp disc base valves regulate the transfer of fluid during the compression cycle to reduce disc flutter during impacts for better vehicle control. The shock’s body has a 2-1/4” diameter which allows for greater fluid capacity and keeps the operation of the shock cooler for increased vehicle control and performance at different speeds and over varied terrains. These shocks are gas pressurized to 150 PSI, which comes with a variety of benefits such as minimizing air-to-oil mixture and boosting the spring rate! The 35mm bore with Full-displaced compression valving displaces more fluid than a traditional rod displaced valving, providing an amplified control of shock motion.
For a durable construction, these RS5000X Shocks feature 16mm nitro-carburized rods that are scuff resistant for better corrosion resistance, and 1.375” sintered iron pistons for added structural conformity. Double welded loops add to the shocks strength and durability, while the installed natural rubber bushings reduce and absorb ride harshness and road noise for a more enjoyable ride in your JK. Smooth piston travel and improved responsiveness are provided by composite glass-filled, Fluon banded pistons that despite road conditions offer smooth operation.
To prolong the shocks performance and provide a quick rebound and smooth compression cycle are low friction, self-lubricating seals that help to retain gas and oil. With help from the included dust boot, this seal also adds a layer of protection against dirt and other debris.
- (2) Front Rancho RS5000X Series Shocks
- (2) Rear Rancho RS5000X Series Shocks
Front Shock Specifications:
Compressed Length - 14.030 inches
Extended Length - 21.850 inches
Travel Length - 7.820 inches
Rear Shock Specifications:
Compressed Length - 14.563 inches
Extended Length - 22.563 inches
Travel Length - 8.000 inches
Order this Rancho Front and Rear RS5000X Shock Absorber Kit for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler with a 0-2" Lift from CJ Pony Parts today!
California Residents: Proposition 65 Warning