Rancho Shock Absorber RS5000X Front/Rear Kit For Stock Ride Height To 1-1/2" Lift Jeep Wrangler JL 2018-2022

Instantly improve your overall handling and performance on and off the road by upgrading your suspension with this Rancho Front and Rear RS5000X Shock Absorber Kit. Made for the 2018-2021 Jeep Wrangler JL with stock suspension up to a 1-1/2-inch lift, these shock absorbers utilize the latest technology to keep you in control at variable speeds in all sorts of conditions. The kit comes with two front shocks and two rear shocks for a total replacement.

This shock's twin body measures 2-1/4" in diameter for greater fluid capacity to keep the shock operating cooler and provides increased control and performance. The 35mm bore and full displaced compression valving displaces more fluid than comparable rod displacing valving for amplified shock motion control, and the sintered iron, fluon banded piston provides smoother piston travel and greater responsiveness to changing road conditions. Gas pressurization reduces air-to-oil mixture (foaming) and shock fade while boosting spring rate. Engineers put special attention in stress ares, like mounting points, and used double-welded loops for added strength and durability over time even when exposed to the roughest trails. To further prolong performance and allow for quicker rebound and smoother compression, Rancho has integrated a low friction, self lubricating seal that retains gas and oil. Natural black rubber bushings and a red polyvinyl accordion protective boot are included to protect the shock from dust, debris and other contaminants.

Features and Benefits:
- 1-3/8" Diameter Sintered Iron Piston
- 2.25" Twin Tube Body
- 16mm Nitro-Carburized Rod
- Full-Displaced 35mm Bore
- Progressive Engagement Valving
- Dynamic Rebound Spring (DRS) Technology
- Gas Pressurization of Shock
- Low-Friction, Self-Lubricating Seal
- Tuned Compression Control Valve
- Black Rubber Bushings with Boot
- Double-Welded Loops

Front Shock Specs:
- Compressed Length: 15.96"
- Extended Length: 21.96"
- Travel Length: 6.00"

Rear Shock Specs:
- Compressed Length: 17.24"
- Extended Length: 24.41"
- Travel Length: 7.17"

For early fluid flow when hitting obstacles or potholes and reducing the harshness of impact, this shock integrates progressive engagement valving. The design includes progressive rebound and compression discs that will engage the valving at lower frequencies to help control the motion energy. A custom tuned clamp disc base valve helps regulate fluid transfer during compression cycles to absorbs impacts without disc flutter for better handling and control and uneven terrain. Another important and unique feature is the patented rebound valving system and advanced compression phase. This process was developed by ride experts to elevate the overall control and performance of your JL on and off the road while reducing body roll and preventing rod over-extension inside the shock.