Rancho Shock Absorber RS5000X Rear For 2-3" Lift Jeep Wrangler JK 2007-2018
- Fits 2-3" Lift
- Fits Rear
- Sold Individually
- Gas Pressurization
Rancho Rear RS5000X Shock Absorber for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers with a 2-3" Lift.
If you have lifted your 2007-2018 Jeep JK Wrangler between 2” to 3” and want to upgrade the rear shocks to improve the ride quality, then you should check out this Rancho Rear RS5000X Shock Absorber from CJ Pony Parts! The RS5000X Shock is an innovative shock absorber that features a unique and patented rebound valving system with an advanced compression phase.
Rancho RS5000X Rear Shock RS55330 Features and Benefits:
- Sold Individually
- Progressive Engagement Valving
- Tuned Compression Control Valve
- Enlarged 2-1/4” Twin Tube Body
- Gas Pressurization of Shock 150 PSI
- 16mm Nitro-Carburized Rod
- Full-Displaced 35mm Bore
- 1.375” Diameter Sintered Iron Piston
- Rebound Bumper
- Black Natural Rubber Bushings
- Low-Friction, Self-Lubricating Seal
- Protective Boot
- Glass-Filled, Fluon Banded Piston
- Double-Welded Loops
- Dust Boot Included
The progressive engagement valving of the Rancho Rear RS5000X Shock Absorber allows for early flow of fluid when hitting obstacles or potholes to reduce the harshness of the impact. This valving also helps to minimize a harsh ride while driving on rough roads. A custom tuned clamp disc base valve helps to regulate fluid transfer during compression cycles to absorb impacts without disc flutter for better vehicle control. The larger 2-1/4” diameter shock body allows for greater fluid capacity to keep the shock operating cooler which provides increased vehicle control and performance at different speeds and over varied terrains. Gas pressurization of the RS5000X shock reduces the chance of foaming and shock fade while providing a boost in spring rate. The 35mm bore with Full-displaced compression valving displaces more fluid than a traditional rod displaced valving, providing an amplified control of shock motion.
For a durable construction, the shock features a 16mm nitro-carburized rod that is scuff resistant for better corrosion resistance, and a 1.375” sintered iron piston for added structural conformity. Natural rubber bushings installed in the double-welded loops help to reduce and absorb ride harshness and road noise for a more enjoyable ride in your JK. For smooth piston travel and improved responsiveness, Rancho utilizes a composite glass-filled, Fluon banded piston that despite road conditions offers smooth operation. To prolong the shocks performance and provide a quick rebound and smooth compression cycle are low friction, self-lubricating seals that help to retain gas and oil. With help from the included dust boot, this seal also adds a layer of protection against dirt and other debris.
Compressed Length - 16.000 inches
Extended Length - 25.688 inches
Travel Length - 9.688 inches
Order this Rancho RS55330 Rear RS5000X Shock Absorber for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler with a 2-3" Lift from CJ Pony Parts today!
California Residents: Proposition 65 Warning