Rancho Shock Absorber RS5000X Rear For Stock Ride Height To 1-1/2" Lift Jeep Wrangler JL 2018-2022
- Fits Rear
- Sold Individually
- Gas Pressurization
- Black Rubber Bushings W/ Boot
Rancho Rear RS5000X Shock Absorber for 2018, 2019, 2020, 2021, and 2022 Jeep JL Wranglers with Stock Ride Height to a 1-1/2" Lift.
If you want better handling both on and off the road, you need to check out this Rancho Rear RS5000X Shock Absorber available at CJ Pony Parts. Made for your 2018-2022 Jeep Wrangler JL, this shock (P/N: RS55064) will greatly improve your performance at variable speeds and on different terrain without hassle on your part. This shock is only for JLs with stock ride height and up to a 1-1/2-inch lift.
This shock's twin body measures 2-1/4" in diameter for greater fluid capacity to keep the shock operating cooler and provides increased control and performance at different speeds on a variety of terrain. The 35mm bore and full displaced compression valving displaces more fluid than comparable rod displacing valving for amplified shock motion control, and the sintered iron, fluon banded piston provides smoother piston travel and greater responsiveness to changing road conditions. Gas pressurization reduces air-to-oil mixture (foaming) and shock fade while boosting spring rate. Engineers put special attention in stress ares, like mounting points, and used double-welded loops for added strength and durability over time. To further prolong performance and allow for quicker rebound and smoother compression, Rancho has integrated a low friction, self-lubricating seal that retains gas and oil. Natural black rubber bushings and a red polyvinyl accordion protective boot are included to protect the shock from dust, debris and other contaminants.
Shock Absorber Features and Benefits:
- 1-3/8" Diameter Sintered Iron Piston
- 2.25" Twin Tube Body
- 16mm Nitro-Carburized Rod
- Full-Displaced 35mm Bore
- Progressive Engagement Valving
- Dynamic Rebound Spring (DRS) Technology
- Gas Pressurization of Shock
- Low-Friction, Self-Lubricating Seal
- Tuned Compression Control Valve
- Black Rubber Bushings with Boot
- Double-Welded Loops
- Sold Individually (1)
- Fits Either Driver or Passenger Side
- Fits 2018-2022 Jeep JL Wranglers
For early fluid flow when hitting obstacles or potholes and reducing the harshness of impact, this shock integrates progressive engagement valving. The design includes progressive rebound and compression discs that will engage the valving at lower frequencies to help control the motion energy. A custom-tuned clamp disc base valve helps regulate fluid transfer during compression cycles to absorbs impacts without disc flutter for better handling and control and uneven terrain. Another important and unique feature is the patented rebound valving system and advanced compression phase. This process was developed by ride experts to elevate the overall control and performance of your JL on and off the road while reducing body roll and preventing rod over-extension inside the shock.
Please Note: This shock absorber is sold individually. Two (2) are required per vehicle.
California Residents: Proposition 65 Warning