Rear Axle Shaft 8" 28-Spline Passenger Side 1965-1966
CJ's Part Number:
RA20
Rear Axle Shaft 8" 28-Spline Passenger Side 1965-1966 is rated
out of
5 by
1.
Highlights
- Fits Passenger Side Rear
- Fits Ford 8" Housings Only
- 28 Spline Axle Shaft
- Direct-Fit Replacement
$209.99
Passenger Side Rear Axle Shaft for 1965-1966 Mustangs with a 28-Spline 8" Rear End.
When your axle breaks or bends, you can count on CJ Pony Parts to have you covered with this direct replacement axle shaft for your Mustang.
This stock replacement rear axle shaft requires no cutting or modification to fit seamlessly into your Mustang. Manufactured to original specifications with 28 inner splines and a stock overall length.
This stock replacement rear axle shaft requires no cutting or modification to fit seamlessly into your Mustang. Manufactured to original specifications with 28 inner splines and a stock overall length.
Installation Difficulty
Moderate
Intermediate skill is required for this installation.
Installation Guides
Rated 5 out of
5
by
malibu from
perfect part
Axle was the correct one. Ordered and received within a few days. No problems.
Date published: 2015-04-30
Will this 8" 28-spline axle fit with drum brakes?
Yes it will.
Date published: 2019-10-04
Will this fit the rare 7 3/4" rear end? Diff tag WCZ-E, 1966 Mustang I wasn't sure if the 7 3/4" axle used the same shafts/bearings as the 8".
rk cjpp- who is the vendor? I will reach out to them.
Date published: 2019-03-27
Is the wheel bearing retainer that bolts the axle in place attached to the axle?
No it is not.
Date published: 2018-05-31
Hello, I need this passenger axle shaft for a 1966 Mustang K code, after checking the original on the car, the differential is a 9" , 28 splines, 30" length , please can you tell me if this remplacement will fit , I need to be sure !!! Thanks !!! Claude
This will only fit the 8 inch rear.
Date published: 2017-02-23
Will this axle pair, driver and passenger side, fit into a straight 6 rear end? I have a 4 lug axle wanting to change to a 5 lug to put on after market 17" wheels. thanks, Randy
I recently had my 4 lug axles re-drilled as a 5 lug with 4.5 pattern. Try a machine/restoration shop. Only cost me about $130. 6 cyl has a 7.5" rear so these axles will not fit.
Date published: 2016-08-16
will the left axle fit 65 falcon futura 8in
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2016-03-17
Hi Does these axles work for the 65 Mustang Shelby 350 with 9" rear end? The driver is 26" long and the passenger is 30" long, 28 spline and small bearings. Do you have the Timken bearings, seals and gaskets? Best regards,
No, these will only fit an 8-inch rear end. We'll have all the supporting parts you need for a 9-inch axle.
Date published: 2015-09-15
What is the distance from one side to the other side?
On metric is 77cm from one side to the other side is from passenger side of my car.this is the long.have you this item??
Date published: 2015-03-18
Might Also Like
