RetroSound Products Sound Dampening Mat 31.5" X 15.75" Sheet Set

RetroSound Products:
MAT30-SD
RetroSound Products Sound Dampening Mat 31.5" X 15.75" Sheet Set is rated 5.0 out of 5 by 1.
  • y_2019, m_12, d_5, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MAT30SD, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 108.91ms
  • REVIEWS, PRODUCT

Highlights

  • Deadens Sound
  • Thermal Protective
  • Easy To Cut
  • Self-Adhesive Backing
MSRP $54.99
$47.99
You save 13%

Set of RetroSound Products 31.5" x 15.75" Sheet Sound Dampening Mats.

If you're concerned about the amount of road and wind noise and vibration you're feeling in your vehicle, then you should probably invest in this Set of RetroSound Products Sound Dampening Mats from CJ Pony Parts! These mats will help get rid of that pesky noise and vibration, resulting in a quieter and more enjoyable ride!

Features & Benefits:
- Great to Use on New Door Panels, Floor Pans, in the Trunk Area and More
- Reduces Road and Wind Noise and Vibration
- Helps Lower Interior Heat
- Three-Ply Construction: Butyl Rubber Membrane and Closed-Cell Foam Around a Foil Core
- Comes with Three (3) Easy-to-Cut 31.5" x 15.75" Sheets that Cover 10 Square Feet
- 4.5mm Thick
- Weighs 10 Pounds
- Easy to Cut to Fit to Contours of Your Vehicle
- Odorless Self-Adhesive Backing for Simple Peel-and-Stick Installation

This Set of RetroSound Products MAT30-SD 31.5" x 15.75" Sheet Sound Dampening Mats is great to use on your new door panels, floor pans, in the trunk area and more: just about anywhere you can think of! Each piece of this 3-piece set is made of a butyl rubber membrane and closed-cell foam that's sandwiched around a foil core. These sheets measure 31.5" x 15.75", cover 10 square feet and weigh 10 pounds total. Not only that, they're easy to cut to fit the contours of your specific vehicle thanks to the fact that they're only 4.5mm thick! You'll love how well this Set of Sound Dampening Mats cuts down on that road and wind noise and vibration, plus how well they help lower the heat you feel in your vehicle's interior. But the best part is how easy these mats are to install. Simply peel off the odorless self-adhesive backing and stick them on. That's it! No special tools needed!

Order a Set of RetroSound Products MAT30-SD 31.5" x 15.75" Sheet Sound Dampening Mats from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,
  • 1980,
  • 1981,
  • 1982,
  • 1983,
  • 1984,
  • 1985,
  • 1986,
  • 1987,

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Rated 5 out of 5 by from Sound Insulation Installs fairly easily if you peal the backing a small amount at a time. Molds well to wherever you want it. Cuts easily with a good pair of scissors. Does not add any bulk to speak of. very pleased
Date published: 2018-09-15
  • y_2019, m_12, d_5, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MAT30SD, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.64ms
  • REVIEWS, PRODUCT

Would one sheet do two door panels and would you still use the stock water back beneath this?

Asked by: 2112
You would have to measure the area you plan to cover. This would be used on the inside of the door. Using this on the back of the door panel may result in inproper fitment.
Answered by: rk cjpp
Date published: 2019-09-01

Is it really only 1,4mm thick? Sounds really thin!!!!

Asked by: PerB
Yes, it is 1.4 mm thick.
Answered by: rk cjpp
Date published: 2018-10-31

how many would i need to order to do the whole floor board?

Asked by: hanscito
The 3 sheets will cover 10 square feet, so you will have to measure what you plan on covering.
Answered by: rk cjpp
Date published: 2017-09-29

Can this product be used as under hood insulation.

Asked by: Littlemaggie
Great to Use on New Door Panels, Floor Pans, in the Trunk Area and More
Answered by: CJPP Dave
Date published: 2019-03-08
  • y_2019, m_12, d_5, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_MAT30SD, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 181.91ms
  • QUESTIONS, PRODUCT