The Ridetech Level 1 Air Suspension System 11330198 is designed to replace the original coil springs on the front of your classic truck and only works on stock upper and lower control arms. The airbags are designed to be installed in the factory lower control arm location. Ridetech includes a pair of HQ Series Shock that pair extremely well with the CoolRide Suspension Kit. Brackets are included for a quick and hassle-free installation.
Front CoolRide Kit Features:
- Driver and passenger side front air springs
- Air spring mounting brackets
- Works on stock lower control arms
- Bolt-on installation
- Adjustable ride height
- Includes custom hardware
The Rear CoolRide Kit will replace the original rear coil springs on your C10. Included are the brackets that install on the air spring and mounts in the factory trailing arm location. Ridetech pairs the Rear CoolRide Kit with a pair of HQ Series Rear Shocks. The ride height on the air spring is approximately five-inch.
- Rear CoolRide kit
- HQ series rear and front shocks
- Front CoolRide kit (for stock lower control arms)
- Shock mounting brackets
- 5-gallon RidePro Compressor kit (analog gauges)
- (2) standard AMK compressors
- Analog control panel
- RidePro valve block
- 1/4" Air Line
- Air line fittings
The Compressor System features a 5-gallon aluminum tank that measures 32” long and 7” in diameter, and can hold plenty of air to take care of raising and lowering your C10 truck. Dual AMK Compressor helps to fill the extra-large 5-gallon tank. The compressor pumps have a volume of .91 cfm @ 150 psi and draw a maximum of 27 amps. All the components connect together with quarter-inch air lines which will supply more than enough air for your truck.
Dual needle gauges help you keep an eye on each air spring’s air pressure so you can adjust the springs as needed. Feeding air to the air springs is Ridetech’s RidePro valve block. The premium-quality valve block has laser etched port markings and weatherpak wiring connectors. RidePro solenoids use exclusive bubble-tight air valves.
Please Note: This Ridetech Air Suspension System will only work on 1963-1972 C10 trucks with stock upper and lower control arms.