Rigid Industries LED Light Bar RDS-Series Pro Spot 40" Radiused

Rigid Industries:
884213

Highlights

  • Blacked-Out Circuit Board
  • Includes Wiring Harness
  • Rohs Compliant
  • Made In The USA
$1,732.99

Rigid Industries 40" Radiused RDS-Series Pro Spot LED Light Bar.

Recent advancements in LED technology have catapulted this Rigid Industries 883213 30" Radiused RDS-Series Pro Spot LED Light Bar to an entirely new level. Featuring an improved output of up to 70% more raw lumens than previous models, this upgraded LED light bar casts more usable light on the road or trail ahead of your rugged rig.

The RDS-Series Pro LED light bars are built off of the E-Series LED Light Bars with an arc applied to the bar itself to ease the installation process. The end result is an equally durable and functional light bar that can be installed in multiple locations. If your truck has curved windows and/or curved bumpers, this arced build will give you an integrated look once the installation is complete. In addition to a style upgrade this curve provides a wider light spread for unmatched coverage with a single light bar. New branding and blacked out circuit boards are utilized to top off the style improvements on this American made LED light bar.

Features and Benefits:
- Blacked-out circuit board
- Improved light output
- Instant on/off
- No warm up
- RoHS compliant
- Over/under voltage protection
- Durable polycarbonate lens
- Designed, engineered and assembled in the USA

RDS-Series Pro Includes:
-
40” RDS-Series Pro Spot LED light bar
- Wiring harness
- Mounting brackets

Rigid Industries LED Lighting has great experience in serving the off-road truck market when it comes to delivering excellent quality lighting at an affordable price. LED lighting technology has come a long way, and with other companies being left in the dust, you can count on Rigid Industries to provide the best in LED lighting for your off-road Ford F-150, Chevrolet, Toyota, Jeep or Dodge truck!

Order this Rigid Industries 884213 40" Radiused RDS-Series Pro Spot LED Light Bar today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today on CJ Off-Road we're going to make our 2017 Raptor see a whole lot better at night when it's out on the trail.

You can never have too much visibility when you're going off-road, and since our 2017 Raptor has a bumper that accepts a 40-inch LED light bar, it only makes sense to install one. So today we're going to be installing this Rigid Industries 40-inch radius LED light bar on our 2017 Raptor.

This light bar features a curved design to fit in nicely with the ADD bumper on the front of our Raptor. And it features 80 super-bright LEDs, putting out over 20,000 lumens, protected by a polycarbonate lens and a cast aluminum housing for maximum durability.

It even comes with a wiring harness to make installation a breeze, so today we're going to install it on our 2017 F-150 Raptor. Tools you'll need for this installation, 7/32" hex key, 11mm wrench, 13mm wrench, 9/16" wrench, and basic wiring tools.

The light bar we're going to be installing goes right here on the bumper. There are pre-drilled holes already in it, but to make install even easier, we picked up this ADD universal light mount kit. These are the brackets that we're going to be using from the light mount kit. We're going to put these right on the bumper.

We're going to put a bracket on each side of the bumper just like that. This part's going to be pretty difficult to see. I'm going to take the hardware that comes with the brackets. I'm going to put my hand through the back of the bumper, and push the bolt up through the hole.

Then put our washer and nut on. Do the same thing to the bracket on the other side. Put the light bar between the brackets. Ease the bolts that come with the light bar to install the brackets to the light bar. Install the second bolt. Install the two other bolts on the other side, and tighten them down. Tighten these bolts down with an 11mm wrench.

This next part is kind of tricky. We have to tighten the nut and bolt underneath the light bar. We're going to be using a 7/32" hex key and a 9/16" wrench. We have the light bar mounted. Now it's time for wiring. We're going to run this wire under the grille right here, have it come up right here from the battery, and then we're going to connect it to the first switch on our factory switch system.

The way the harness comes out of the box, we have just enough slack to ground it right to the battery, but we need to extend the power wire just a little bit to connect to that first wire for switch number one.

We have the battery disconnected. Now we're going to connect our ground wire to the ground lead on the battery. All we have to do now is hook up the power wire.

We have our wire around to the battery, but to play it safe, we're not going to be using just the factory wiring for this system. You have the potential to blow the fuse, so we're going to use the wiring that came with the light bar, and I'm going to show you where we're going to put all these wires. This red wire with the fuse, and the black wire, this is going to go right to the battery.

These three wires that originally connect to the switch that comes with the kit, we're going to use this blue wire and connect it to the blue and green wire which is the number one switch inside the truck, and then we're just going to tape off these black and red wires.

Okay, we got our relays sitting right here. We have our main ground hooked up to the battery and the main power hooked up to the battery. And we have our trigger wire hooked up to the switch number one, and now we can test out the light and see how it looks. All right, let's see how the light looks.

Okay, we got our Rigid Industries 40-inch light bar installed. It is incredibly bright. The headlights can't even compare to this thing. The Addictive Desert Design's mounting brackets made it install perfectly. Install's really not that bad. It should only take you about an hour, and before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following Colorado years:

  • 2004,
  • 2005,
  • 2006,
  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2015,
  • 2016,
  • 2017,
  • 2018,

This product will fit the following F-150 years:

This product will fit the following Gladiator years:

This product will fit the following Ram years:

  • 1994,
  • 1995,
  • 1996,
  • 1997,
  • 1998,
  • 1999,
  • 2000,
  • 2001,
  • 2002,
  • 2003,
  • 2004,
  • 2005,
  • 2006,
  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,

This product will fit the following Silverado years:

  • 1999,
  • 2000,
  • 2001,
  • 2002,
  • 2003,
  • 2004,
  • 2005,
  • 2006,
  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,

This product will fit the following Tacoma years:

  • 1995,
  • 1996,
  • 1997,
  • 1998,
  • 1999,
  • 2000,
  • 2001,
  • 2002,
  • 2003,
  • 2004,
  • 2005,
  • 2006,
  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,

This product will fit the following Tundra years:

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.