Rigid Industries Windshield Brow Bracket Mounting Kit For 50" LED Light Bar Jeep Wrangler JK 2007-2018
- JK Windshield Light Bar Mount
- For E Or Sr Series 50" Lights
- Stainless Steel Construction
- Black Powder Coated Finish
Rigid Industries Windshield Brow Bracket Mounting Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers with a 50" Rigid Industries LED Light Bar.
If you need to install a 50" Rigid Industries LED Light Bar onto your 2007-2018 Jeep Wrangler JK, this Windshield Brow Bracket Mounting Kit is just what you are looking for!
Features and Benefits of the Rigid Industries Windshield Brow Bracket Mounting Kit (40131):
- Made out of premium steel
- Satin black powder coat finish
- Uses existing mounting points on your Jeep JK's A-pillars
- Comes with rubber gaskets
- No drilling or cutting required
- Specifically designed to mount Rigid Industries 50" LED Light Bars
The Rigid Industries Jeep JK Brow Mount Kit is specifically designed to install a Rigid Industries 50" E-Series or SR-Series LED light bar (not included) over the windshield of your Jeep JK using the existing mounting points on the A-pillars. No drilling or cutting is necessary!
These brackets are made from high strength 3/16" mild steel and come with a satin black powder coat finish to match your new light bar. This mounting kit also includes rubber gaskets to keep the brackets from damaging your Jeep's paint.
Tech Tip: Installation of a LED Light Bar on the roof of your Wrangler may impact airflow and generate noise at high speeds.
Please Note: If you are using this mounting kit with the A-Pillar Dually/D2 lighting and mounting kits, you must use longer M8x1.25x35mm bolts. This hardware is NOT included.
Tech Tip: These light bar mounts are for use with LED light bars which have a 50" width from side mounting holes. Please make sure to measure your light bar before purchasing these brackets. Some light bars are manufactured as a 50" light bar from the "L" bracket lower mounting location, while most are measured from the side of the actual bar. If the light bar measures less than 50" without the "L" bracket on the sides, these brackets will not work.
Rigid Industries LED Lighting has great experience in serving the off-road market when it comes to delivering quality lighting at an affordable price. LED lighting technology has come a long way, and with other companies being left in the dust, you can count on Rigid Industries to provide the best in LED lighting for your Jeep Wrangler.
Order this Rigid Industries 40131 Windshield Brow Bracket Mounting Kit for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler with a 50" Rigid Industries LED Light Bar from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Extra light on you JK would be great if you're on the trail and even on the road. So, if you're looking to mount a 50 inch light bar, then today we're going to be looking at this 50 inch rigid industries light bar mount fitting your 2007 to 2018 Jeep Wrangler.
This light bar mount features a premium steel construction, which is then finished in a satin black powder coat finish.
It uses the existing mounting points on your Jeep JK's A-pillars to successfully mount a 50 inch light bar. It does include rubber gaskets and there is no drilling or cutting required.
So, today we're going to install it on our 2008 Jeep Wrangler.
We're going to get started with the installation of our rigid industries light brackets. Now the first step is to remove your factory hardware. Our 2008 Jeep Wrangler, we have aftermarket hardware, which requires a 13 mm bolt. You'd normally use a T30 torques bit to get your factory hardware removed.
Now with the rubber gasket you can actually pre-install it on the back. It doesn't use any tools or anything, just set it on there. That way when you put it on it doesn't scratch up your paint.
We're using our aftermarket hardware to reinstall it but you'd just reuse the factory T30 torques bolts to reinstall yours.
We're going to go through and just snug all these up and then come back and really tighten them down.
After you get all these tightened up we're going to put the other bracket on the passenger side and your installation is complete.
So we just got the brackets installed and they look great. The only thing missing is a 50 inch light bar. The install time is super short, at about 15 minutes.
The only tool you need will be a ratchet and a T30 torques bit. You can find these light bar brackets as well as many other great parts for your JK here at CJPonyParts.com.