Roush Axle-Back Exhaust Stainless Steel Without Active Exhaust V6/EcoBoost 2015-2020

Roush:
421837
Rating:
97% of 100

Highlights

  • 304 Stainless Steel
  • Straight-Thru Design
  • Axle-Back Exhaust
  • Fits OEM Ford Rear Valance
MSRP $727.00
$699.99
You save $27.01

Roush Stainless Steel Axle-Back Exhaust for 2015, 2016, 2017, 2018, 2019 and 2020 V6 and EcoBoost Mustangs without the Factory Active Exhaust Option.

This axle-back exhaust from Roush will offer your 2015-2020 V6 or EcoBoost Mustang a distinct and aggressive sound. This highly tuned system will avoid the annoying drone or rasp that can occur with other competitive exhaust systems on the market.

Constructed from 304 Stainless Steel, this axle back exhaust system features an exclusive open-chambered design that will not deteriorate over time, unlike conventional fiberglass packing material. The round exhaust tips are also made from stainless steel and finished with a unique process that provides heat resistance to color change. Like all Roush products, installation is quick, easy, and uses all factory hanger locations. The only necessary modifications to the vehicle is that the factory exhaust will need to be cut off so that the new Roush axle-back can easily install with the provided clamps.

Features and Benefits:
- Fills OEM Ford Rear Valance
- Zero Impact on Emission Devices
- Straight-Thru Design Yields Higher Airflow and Performance
- Full 304 Stainless Steel Construction
- Includes Clamps and Installation Instructions

*Installation requires cutting of the factory exhaust piping. Once the modifications have been made to the factory exhaust system, Installation is a simple bolt-in procedure.

Please Note: Will not fit 2019 EcoBoost Mustangs that are equipped with the Active Exhaust Option from the factory.

How well do you want your Mustang to look and perform? With any of the parts from Roush Performance, you can give it a major performance overhaul, and add some visual styling that will make your Mustang stand apart from the crowd. CJ Pony Parts is a Roush Top 10 Dealer and has over 100 parts from Roush Performance for many different years of Mustang, many of which are in stock and ready to ship today.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

The exhaust sound of the EcoBoost Mustang is definitely a hot topic among Mustang enthusiasts. We all know Ford piped in some sound through the stereo speakers to try to give the EcoBoost a little bit of a deeper tone the Mustang enthusiasts are more familiar with. While some people are okay with the sound of a 4 cylinder Mustang, others feel you have to have that V-8 growl for it to truly sound like a Mustang.

Well, the 4 cylinder is here to stay. It's always going to sound like a 4 cylinder because it's simply 4 cylinders shy of giving you that V-8 growl. That doesn't mean that we can't sound better.

We've had great results with Roush exhaust systems on previous models. Today we're going to install their axle back system on our EcoBoost project car. The Roush system is made of T 304 stainless steel including the polished 304 stainless steel rolled double wall tips. The system will require cutting for installation. Besides that is a direct bolt on, on your Eco-Boost or will also fit your V-6 Mustang. All Roush mufflers use a straight through design to give you a nice aggressive tone, also keeping drone at a minimum.

We'll start off with some factory exhaust clips. Our EcoBoost currently is 100% factory exhaust including the down pipe. Factory exhaust definitely on the quiet side. Also has that 4 cylinder sound.

Let's get started with our Roush. For this installation we need a lift or a jack and jack stands, marker, sawzall, file, 3/8 ratchet, 15 millimeter socket and safety glasses.

Like all axle back systems with the 2015 Mustang, you are going to have to cut to do the installation. In the case of the Roush the instructions make it pretty clear. What they tell you to do is to cut at the end of the tangent of the curve. I know we all paid attention in geometry class. If you need a refresher the tangent is where the curve ends and flattens out. What you do is go to the curve here. The pipe almost has a mark where you want to cut. Follow to the end of the curve where it's flat. Make a little mark and that's where we're going to cut.

Since the muffler tip will go up once you cut it, we would suggest putting some rags or something in there to protect the balance especially in our case we wouldn't want to damage our carbon fiber. That will stop it from going too high and damaging anything.

On the car we found a sawzall is the best thing to use to cut through here. If you want to you can put something behind to protect the suspension. As long as you're careful you shouldn't have any problems.

Now we'll just slide it up out of the hanger by moving it forward and put it aside. Want to make sure once you cut it the steel back through, just deburr it real quick. Make sure there's no sharp edges.

Now put the clamp on. Slide that over. Start by putting the new muffler up into the hanger. What we'll do is kind of turn it in place here. Slide it over our cut and move the clamp over. Now we'll tighten up the clamp. Don't use an air impact on this because you can damage the clamp. Either a low torque electric or do it by hand.

Now the same thing with our tip, put one of our clamps in place. Tip in. Get it lined up roughly where we want it and we can tighten down.

Repeat the process on the other side and installation's finished.

Now let's try it out with our Roush exhaust. It's not real loud inside the cabin. You can definitely tell it has an aftermarket sound to it. It does have that Roush signature sound with just a little bit of a different tone because of the 4 cylinder.

The Roush axle back added a nice aggressive sound to our EcoBoost Mustang. The sound is definitely signature Roush. The muffler has a very similar sound to other ones we've installed with the tone being a little bit different because obviously like I said it is a 4 cylinder Mustang. Like all Roush performance products the fit and finish is excellent. The installation is pretty straight forward. It will probably take you around an hour and you'll be back on the road in no time. For more Roush installation videos may be subscribed through our YouTube channel. For the best selection of Roush performance parts check out CJPonyParts.com.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.